Has anyone had an issue after maybe an update with any module you now get "H2 Reserve Please Refuel". I know it's not the fuel sensor because I changed it and I was able to the sensor working properly under the hidden menu when pressing the mileage reset button. To me it seems that maybe the fuel gauge needs to be enabled. I was using NCSEXPERT/NCSDUMMY tried turning off the warning for 'H2 RESERVE' but it continues to come back on. Anyone has any solutions would ISTA/P fix this issue if so what are the steps(I have ISTA+ and ISTA/P working perfectly) ?
Moved to model sub forum.
Are you saying I am in the wrong forum for this issue?
At one time, there was only one forum for every platform of the 7 series. That is where you posted. Sub forums for the different models were added years ago. Very few members visit the original forum anymore so when someone posts there, I move it to the appropriate sub forum You will get more eyes on it here. You can also try posting in the General Mechanical forum. There are many Master Techs there that may have come across your issue.
http://www.bimmerforums.com/forum/fo...ean-Auto-Parts
Thanks so much
Did you ever fix your problem?
Bookmarks