( to be continued )
Last edited by patrick S; 04-26-2015 at 05:54 PM.
start to
route ultrasonic sensor wires,
Last edited by patrick S; 04-26-2015 at 05:56 PM.
and of course while cutting into trunk wiring loom reconnect all broken wires AND SLIDE WIRING LOOM FURTHER INSIDE TRUNK LID ( theres plenty of wire length inside car) to move broken part into trunk lid. now you have fresh part of loom in bending place
central locks work only when doors are closed!
Last edited by patrick S; 04-26-2015 at 05:57 PM.
will post immobiliser writeup sometimes later
feel free to ask any electrical guestions, maybe i know the ansver
oh and people who have 94 or newer e36 with comfort function
Last edited by patrick S; 04-26-2015 at 05:58 PM.
excellant job man!! pm filip75 to get this added to his DIY page, I am sure I will have to refer back to it later, I had a hell of a time finding the lokc/unlock wires
WOW! Awesome post...I'm sooooo glad I have a prewired E36 for my alarm install. LOL! But this is an excellent resource for those who don't!
1997 328i Jet Black (Sold)
1995 M3 Daytona Violet (SOLD)
Planning his return to Bimmerdom...
I've got it up, so you can find it laterOriginally Posted by SecretAznMan4u
Great write-up
Ordered: '14 BMW M4
Current: '08 Suzuki GSXR 1000; '08 HD Street Bob
Previous: '06 BMW 330Ci; '06 Mercedes CLK-350; '04 Acura TL A-Spec; '95 BMW 318ti
I just wanted to thank you for this write-up!
I'm about to install an alarm in my 92 and I have no directions cuz I pulled it out of another car
hi,Originally Posted by patrick S
thanks for such a great "how to"
i am a little confused though.
if i use this scheme (quoted above) i do not need to use diodes?
i take it that the above is conected to a relay.
any help would be great.
thanks
Last edited by blob; 09-12-2004 at 03:57 AM. Reason: added more detail
I repaired the motor on my coupe without removing it from the door.Originally Posted by patrick S
I had a Key fob that came with my car but I lost it. How do I know that I had an alarm? Key fob didnt work so I guess it was deactivated.
U MAD?
Sweet! I'll have to give this "window problem" a try. My driver's side window has been REALLY annoying now.
Anybody try this out yet?
2005 Audi (Purchased 07/09) - 2005 Yamaha R6 (Raven) (Purchased 5/06)
07/97 BMW (Sold 08/09) - 03/01 Audi A4 1.8TMCX (Sold 06/03)
Please do NOT PM me! Email me: clumpymold@sbcglobal.net
bumpOriginally Posted by blob
I would like to know this too
OK
to get cl working properly you have to connect strictly by the scheme. these are relays that are in alarm itself. if no diodes are on the scheme then they are not needed. comfort signal has to be positive.
it seems like i have to explain how the scheme works, i will do it later.
and pm is always faster tham post here
great write up. You'll save the community here thousands in labor costs, and prevent a theft or two while we're at it. nice work.
If I have an aftermarket alarm.....Would I be able to install my alarm as these steps described ?? I have a Taiwan made Magicar FAI300 alarm system...want to intall in my 92' 325i...Thanks..
Great thread! Thank you.
1996 Hellrot on Modena M3
1991 Imola on black 318is
Wow, I'm surprised no one asked about the window problem. Could you elaborate more on that? You just showed us where it should be but don't mention how to do it.
2005 Audi (Purchased 07/09) - 2005 Yamaha R6 (Raven) (Purchased 5/06)
07/97 BMW (Sold 08/09) - 03/01 Audi A4 1.8TMCX (Sold 06/03)
Please do NOT PM me! Email me: clumpymold@sbcglobal.net
just use screwdriver
Last edited by patrick S; 04-26-2015 at 05:59 PM.
you can install any alarm with these instructions-they are all similarIf I have an aftermarket alarm.....Would I be able to install my alarm as these steps described ?? I have a Taiwan made Magicar FAI300 alarm system...want to intall in my 92' 325i...Thanks..
let me explain central locking once again as this seems to be the most difficult part:
did you notice that you have to cut lock wire?
Last edited by patrick S; 04-26-2015 at 06:00 PM.
Bookmarks