Sold
Bought this kit over a year ago from these forums, never installed it and selling it since I am now getting ready to sell my E36.
The only difference is now the kit will include all bearing and seals needed for a full rebuild.
__________________________________________________ __________________________________________________ _______________________________________
Information below copied directly from the FS post I purchased this kit from, and link to original FS post:
https://www.bimmerforums.com/forum/s...nger-Available
"I am in process of my S54 swap so its time to let go of my Dinan Supercharger kit. The kit was installed by a BMW dealer in Southern California. The kit has about 40K miles on it. There is no visible play in the supercharger shaft and the wheel looks to be in perfect condition. I would however suggest a rebuild (bearings and seals) as preventative maintenance prior to installation but that is up to the new owner."
The kit will include everything listed below:
S52 ECU with Dinan Software
Vortech V2 S-Trim Supercharger
Dinan Main Charger Bracket w/Hardware
Dinan Upper Charger Bracket w/Hardware
Dinan Lower Charger Leg Bracket w/Hardware
Dinan Lower Charger Leg Spacer
Dinan Rear Charger Leg Brace w/112mm Bolt
Dinan M10 Supercharger Mounting Stud (D673-10219)
Dinan M10 Mounting Bushing (D612-0310)
Dinan M8 Supercharger Mounting Stud (D673-0116)
Dinan M8 Mounting Bushing (D612-0309)
Dinan Supercharger Oil Feed AN Fitting
Dinan Modified OBDII Oil Dipstick Tube
Dinan Crank Pulley (D315-0545) w/bolts
Dinan Supercharger Pulley (D315-0306)
Belt Tensioner Pulley (36094)
Dinan Supercharger Belt (D862-4217)
Dinan Air Filter (D403-0300)
Dinan Silicone Elbow (D340-0720)
Dinan Silicone Elbow (D340-0660A)
Dinan Intake Side Metal Elbow (SC to MAF)
Dinan Accordion Couplers [Qty 2]
Dinan Intake Side Metal Elbow (MAF to Air Filter)
Bypass Valve (0280142102)
Dinan Silicone Elbow ? Throttle Body (D340-0670)
Dinan Boost Tube Metal
Dinan/Lucas 28.8# Injectors (D1720BA)
Dinan clutch Fan Spacer
Brake Booster Hose w/Dinan Vacuum Tee
Dinan CCV Setup
Alternator bolt
Below are the bearings and seals included:
Last edited by ErikV; 09-04-2018 at 10:35 AM.
For any interested buyers, I can help restore this to like new.
Do want, have to do some research to see what I need to make it fit in s52 z3m. Brb
Sent from my iPhone using Tapatalk
Last edited by Braymond141; 09-03-2018 at 07:01 PM.
Sold
Last edited by ErikV; 09-04-2018 at 10:35 AM.
I have a 10psi Dinan setup with RMS cooler I’ll be selling. It’s ready to go, but I bought a Carrera yesterday so the M3 will be departing soon.
(Not trying to highjack the thread just though if you missed out on this one, mine might interest you)
Last edited by carguyspeaks; 09-05-2018 at 02:11 PM.
Sent from my iPhone using Tapatalk Pro
Adam,
What are you looking to get for your Dinan/rms setup?
Email me at:
Brooke at SBMC dot com.
I should add, I had my blower painted VHT black and replaced all fasteners with Stainless bolts. so it's pretty today
Bookmarks