RM European Auto Parts
Results 1 to 5 of 5

Thread: New Injectors needed in UK

  1. #1
    Join Date
    Aug 2018
    Location
    somerset
    Posts
    2
    My Cars
    bmw

    New Injectors needed in UK

    My Cars bmw











    Hi I am new to this so I hope this all makes sense!! I am having to replace 2 fuel injectors on my 2008 E93 3 series convertible petrol. its a 325I with 3.0 engine and the injectors seem to cost quite a lot, around £300 each!! I can find the same looking ones but for a 335I which I presume has a larger engine? does anybody know what would happen if I used these in my 3.0 engine? many thanks all














  2. #2
    Join Date
    Jul 2013
    Location
    Casablanca, Morocco
    Posts
    780
    My Cars
    2001 e46 323i
    The 335i has a 3.0 as well, but twin turbo so the injectors might have different ratings to be able to sustain higher fuel delivery than your naturally aspirated engine.
    You can browse through this website, respectively with your car's specs and the 335i and compare the injectors' part numbers. If the part numbers are different you can still google each one of them to look up their specs and look for their "cc/min" ratings:
    www.realoem.com
    "If you have integrity, nothing else matters. If you don't have integrity, nothing else matters." Alan K. Simpson.
    5spd E46 "3XX": 328i engine, 330i Intake and exhaust, CAI, 323i diff.

  3. #3
    Join Date
    Jun 2002
    Location
    Aberdeen, NC (yes, again)
    Posts
    23,712
    My Cars
    E39M5, E500 4WD
    The 335 has direct injection. The injectors and fuel system are not even remotely related to your car. They don't look anything like your injectors either, so I'd have to wonder where you're getting your information?
    Last edited by bmwdirtracer; 08-18-2018 at 06:47 PM.

    Chris Powell
    Racer and Instructor since, well. decades, ok?
    Master Auto Tech, owner of German Motors of Aberdeen
    BMWCCA 274412
    German Motors is hiring ! https://www.bimmerforums.com/forum/s...1#post30831471

  4. #4
    Join Date
    Jul 2004
    Location
    Houston, TX
    Posts
    12,521
    My Cars
    36 Cylinders
    N53 engine (not available in US) was direct injected, non turbo.


    Only N53 or N43 injectors will work.
    Last edited by 328 Power 04; 08-18-2018 at 10:34 PM.
    -Abel

    - E36 328is ~210-220whp: Lots of Mods.
    - 2000 Z3: Many Mods.
    - 2003 VW Jetta TDI Manual 47-50mpg
    - 1999 S52 Estoril M Coupe
    - 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
    - 2019 M2 Competition, self-tuned, 504whp
    - 2016 Mini Cooper S

  5. #5
    Join Date
    Jun 2002
    Location
    Aberdeen, NC (yes, again)
    Posts
    23,712
    My Cars
    E39M5, E500 4WD
    Thanks Abel. I learn something new every day.

    Chris Powell
    Racer and Instructor since, well. decades, ok?
    Master Auto Tech, owner of German Motors of Aberdeen
    BMWCCA 274412
    German Motors is hiring ! https://www.bimmerforums.com/forum/s...1#post30831471

Similar Threads

  1. Need quick help! Need INPA download to code new injectors!
    By Christian in forum Diagnostic Software
    Replies: 2
    Last Post: 12-22-2014, 09:23 AM
  2. Replies: 5
    Last Post: 04-02-2006, 06:54 PM
  3. After headers, do i need new injectors?
    By DTM325 in forum 1991 - 1999 (E36)
    Replies: 3
    Last Post: 06-20-2005, 11:50 AM
  4. Replies: 8
    Last Post: 12-04-2002, 08:38 PM
  5. New injectors, need to get my chip reprogrameed....HELP
    By Spencer in forum 1992 - 1999 M3 (E36)
    Replies: 2
    Last Post: 04-02-2001, 10:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •