Results 1 to 3 of 3

Thread: M54B30 and M50 non vanos intake cams

  1. #1
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,867
    My Cars
    86 325es

    M54B30 and M50 non vanos intake cams

    Intake cam from an M54B30. 240 degree duration. Very good condition, I ran this in my car for awhile. Cheap upgrade for an M52 or M50 intake cam.







    $100 shipped

    M50 non vanos intake cam. 240 degree duration. This can be run as an exhaust cam but needs to be timed by hand. Same lift profile as an s52 exhaust cam. I can help you with the timing, its easy.







    $60 shipped


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  2. #2
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    5,867
    My Cars
    86 325es
    bump


    86 325es, 2.8L m50, S476sxe, MS3pro Ultimate, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  3. #3
    Join Date
    Dec 2008
    Location
    Jacksonville
    Posts
    37
    My Cars
    1986 325es
    Thread revival. I'll take the M50NV intake cam if you still have it
    1986 325es M50NV
    Turbo Build

Similar Threads

  1. M50 non-vanos intake cam, to zorst side?
    By Cheddle in forum 1991 - 1999 (E36)
    Replies: 0
    Last Post: 12-23-2009, 03:08 AM
  2. m50 non vanos intake manifold and engine
    By merikgvr4 in forum Engines, Performance Parts & Software
    Replies: 1
    Last Post: 09-08-2008, 09:01 PM
  3. M50 Non Vanos intake, e34 525i Radiator
    By Fartbref25 in forum Engines, Performance Parts & Software
    Replies: 1
    Last Post: 08-23-2008, 02:30 PM
  4. M50 non vanos intake
    By Fartbref25 in forum Engines, Performance Parts & Software
    Replies: 0
    Last Post: 04-21-2008, 09:36 PM
  5. M50 manifold and non vanos intake cam
    By nobrakese36 in forum Engines, Performance Parts & Software
    Replies: 6
    Last Post: 12-16-2007, 09:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •