Hello im trying to install a stock exhaust for inspection. Will the exhaust leak if im just using part number 8 and 9 on the diagram and tightening up the bolts? Came only with gasket for the manifolds, thanks
Those littke wierd material donuts squeeze down when you clamp them in place with the flange. They should not leak
No e30s again.
The aft exhaust coupling will leak exhaust gases if you don’t use #8 and #9.
Additionally, the forward end will leak exhaust gases if you are not using #4 or #5.
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 08-12-2018 at 09:19 AM.
Bookmarks