I messed up, please help

[Farroh]

hey guys I pretty much mess up.


long story short I was getting a fault code:
Code:
6E4F
Description:
DSC: control unit: pump activations

so I went to INPA and under UFI I noticed my DSC is showing 000000 for VIN number.

for some reason I went to WinKFP and decided to flash the DSC with the VIN number.

when I flashed it i got an error at the end:

Error 211:
Error on flash programmingl
Code 2080 Programming state invalid.

now I'm getting all sorts of fault in the system related to DSC.

what do i do?

[328 Power 04]

What exact interface were you using?

[Farroh]

So I ended up fixing this issue. I was missing some settings in WinKFP config and was able to successfully flash it.

only problem I'm getting now is the original fault code

Code:
6E4F
Description:
DSC: control unit: pump activations

I tried resetting the fault code but it still comes back and on my dash and nav screen i get ABS malfunction. I get all 3 lights lighting up. brakes abs dsc.