FS: Turner Motorsport Monoball Control Arm Assemblies

[Nanajoth]

Both sets are new, never installed Turner Motorsport PN: T#399793
SOLD

$375 (SOLD)



$325 SOLD






.

[Alpine840]

Tried sending you PMs but not sure if they went through, can you PM me? Thanks

[dragon850]

Those don't look like E31 upper control arms

[8eights]

I thought the same, I'm guessing the arm and all is Turner

https://www.turnermotorsport.com/p-3...nstalled-arms/

[dragon850]

I thought the same, I'm guessing the arm and all is Turner

https://www.turnermotorsport.com/p-3...nstalled-arms/

Looks like a 3 series arm to me...

[Nanajoth]

That is what I bought them as, the arm itself does not have a part number to check against. If you have one laying around I can measure them to verify.

[Nanajoth]

I just compared them to the E34/E28 type control arm, the bend is different than these arms. They can't be 3 series due to the difference in suspension set up and bushing size.

[dragon850]

What ever they are they are sure not E31 arms.

[Nanajoth]

They could be E32, but those are the same as the E31. Maybe I am not seeing what you are, what is different about them?

[dragon850]

the bends are different and they loo like they are also flat in some spots

[cartoonz]

yet they are the exact same as the pics on both Turner and ECS.