Will Both trailing arms work with a z3 2.8 coupe?
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
The trailing arms should work with a Z3 2.8 Couped as the body and mounting points for the subframe and diff are identical. However I think you may need to also use the subframe from an "M" to make them work (which I'm also selling) as the geometries may be different. But I'm not positive. I'm also not sure if the length of the output shafts from a Z3 M and none M are the same so you'd need to check on this and also to make sure the diameter of the splines going into the wheel bearings is the same. I'd bet someone on the forum here could answer these questions You could check with Randy Forbes he might know for sure about all.
Last edited by CMM3; 07-14-2018 at 08:55 PM.
Thanks will do
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Looking for M axles if you have any
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
Messaged
Hrmmmi
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Bookmarks