I've looked at previous posts and they don't seem to show where the neck of the OS meets the connection point. Mine just doesn't line up right; unless I received a bad part. I've placed it in the right spot and it fits without the connector on, but doesn't line up with the end point. See pictures. Can anyone tell me what I'm doing wrong here? I've had plenty of room to play around with no Guide Rail in yet and even before U Guide goes in. The vent tube is no problem. IMG_7530.JPGIMG_7536.JPGIMG_7541.JPGIMG_7539.JPGIMG_7540.JPG
Hi Jerry, I took your picture and made few notes:
IMG_7536.JPG
You basically fitted new end of the oil separator to the old one. Take the old one out.
Current: 2007 Z4 M Coupe (blue/black)
Previous: 2001 740iL Sport (black/black), 2000 528i Sport (black/tan), 1995 318is (black/black), 1991 318is (white/black)
Wow! Like I was saying, I didn't see any previous posts that explained this. If its that simple you have made my day. Thanks for the reply and I'll let you know how it turned out.
Thanks to Ruskii for great instruction on how to install Oil Separator. 5 minutes after knowing how to connect the darn thing.
Glad to help!
Current: 2007 Z4 M Coupe (blue/black)
Previous: 2001 740iL Sport (black/black), 2000 528i Sport (black/tan), 1995 318is (black/black), 1991 318is (white/black)
OP thinks this thread is CLOSED.
Bookmarks