Hello all,
I own BMW e38 750iL 2001 with transmission communication problem.
I unable to scan both DME's with INPA.
I received the following error:
"IFH-0010: Data transmission to control unit disturbed"
My setup:
Dell Latitude D820 with real RS232 serial port (configured to port 1 via bios + FIFO TX and RX set to 8)
OS windows XP 32bit SP3 black edition
Tiny ADS interface
INPA V3 - set to ADS mode using the ADS32 setup and also I verified in ediabas.ini that it's set to ADS mode
I'm able to connect to all modules except DME's.
I tried to change the FIFO TX and RX to 1 and it's still not working.
What should I try next?
Thank you!
Last edited by Tomerinbar1; 06-27-2018 at 08:40 AM.
You need to use DIS/GT1. Ive never been able to make inpa work on those
Current:
- 09 335i MSport, FBO.
- 98 Euro M3, Estoril Blue
- 04 M3, Carbon Black, 6 Speed Coupe
- 06 M5, Black on Black, Full Leather.
- 73 3.0CS, Tagia Green, 5 speed M30b35 converted
Ex's: 1984 325e, 1988 325IX, 1992 525I, 1995 540i/6, 2002 330i, 2005 330xi, 1992 850i, 2003 330i #1, 2003 330i #2, 2002 330ci, 2004 330ci, 2007 328CI, 2007 335i, 2001 M3, 2006 M5 6 speed
V44 or V57?
Where is the best place to start?
Bookmarks