Results 1 to 9 of 9

Thread: Inpa

  1. #1
    Join Date
    Feb 2009
    Location
    Olyphant, Pa
    Posts
    233
    My Cars
    2000 740i--944

    Inpa

    Is anyone familiar with using INPA ? Just purchased software and cables. installed, not communicating with car.
    Only getting one solid black dot.
    Does the key need to be on for the program to work ?
    Any information on using the program ?
    Thanks

  2. #2
    Join Date
    Mar 2011
    Location
    Greenville, NC
    Posts
    506
    My Cars
    2001 7-S62, 2002 X5 S2,
    YouTube is your friend. Plenty of videos and write ups out there.

    Yes, the key needs to be in position 2 to give the program something to see.
    2001 | DINAN 7 Sport | S62 Swapped 6-Speed
    DINAN Springs & Exhaust | 750 Brakes | M-Pars | Monsoons | NBT Nav/Radio
    Dual Pane Glass | Black & Sand Int.

    2001
    | 750iL | AlpineWeiss III

    @scotthduke on Instagram


  3. #3
    Join Date
    May 2011
    Location
    lA, ca, lA
    Posts
    886
    My Cars
    BLK 01 sp, 20 Trail Boss
    Are you using the obd port in the car or the 21 pin under the hood ? and yes ignition to position 2 and mine only works if I have the ignition on to 2 then open inpa...........
    Last edited by setconstr; 06-23-2018 at 08:06 PM.

  4. #4
    Join Date
    Feb 2009
    Location
    Olyphant, Pa
    Posts
    233
    My Cars
    2000 740i--944
    Thanks for getting back to me. I am connecting with the vehicle both with the OBD in car and the under hood connector. I just don't know the steps for coding my DSC module.

  5. #5
    Join Date
    Oct 2013
    Location
    Louisa, VA
    Posts
    371
    My Cars
    2007 Z4 M Coupe
    I believe INPA is for diagnostic purposes only, not coding.
    Current: 2007 Z4 M Coupe (blue/black)
    Previous: 2001 740iL Sport (black/black), 2000 528i Sport (black/tan), 1995 318is (black/black), 1991 318is (white/black)

  6. #6
    Join Date
    Aug 2017
    Location
    Wayne,PA
    Posts
    1,511
    My Cars
    740iL (E38 '01)
    Quote Originally Posted by atr42nz View Post
    Thanks for getting back to me. I am connecting with the vehicle both with the OBD in car and the under hood connector. I just don't know the steps for coding my DSC module.
    I think you need NCS for coding, though never done the DSC module

  7. #7
    Join Date
    Feb 2009
    Location
    Olyphant, Pa
    Posts
    233
    My Cars
    2000 740i--944
    Thanks, I do have NCS. I guess I'll have to learn it. Any idea what it would cost to have a garage do coding?

  8. #8
    Join Date
    May 2011
    Location
    lA, ca, lA
    Posts
    886
    My Cars
    BLK 01 sp, 20 Trail Boss
    If your DCS light is on you can find and clear the fault with INPA

  9. #9
    Join Date
    Jun 2008
    Location
    Atlanta, GA
    Posts
    4,176
    My Cars
    E53, E38, E34, E39T
    E38 ABS Module coding is done through SSS Progman. Follow the below procedure

    https://www.youtube.com/watch?v=vx8FwUCkHys





    Some Places remain unknown because no one has ventured forth. Others remain so because no one has ever come back......

Similar Threads

  1. Settings in GT1/DIS to use the INPA Interface ?
    By MPower2007 in forum Diagnostic Software
    Replies: 577
    Last Post: 05-30-2018, 06:35 PM
  2. I'm starting a new Diagnostic forum about DIS, INPA, EDIABAS. Help me with its design
    By nuvola rossa in forum General BMW and Automotive Discussion sponsored by Intercity Lines
    Replies: 62
    Last Post: 10-10-2007, 12:22 AM
  3. BMW INPA "interuption with interface"
    By kirbykirbykirby in forum Diagnostic Software
    Replies: 11
    Last Post: 09-02-2007, 11:47 AM
  4. EDIBAS INPA Software
    By Keith Nguyen in forum General BMW Mechanical Help sponsored by RM European Auto Parts
    Replies: 14
    Last Post: 08-02-2007, 06:18 PM
  5. Anyone here no anything about INPA?
    By ZeroG in forum 1991 - 1999 (E36)
    Replies: 0
    Last Post: 02-12-2007, 01:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •