Hey guys, I have a 95 m3 and when I bought it it had the supercharger already installed. I am thinking about taking it out. Can someone please help me in telling me what all needs to be done to do this? It is a vortech v2 supercharger.
Thanks
First remove any piping, MAF, air filter, then remove the Vortech unit and bracket. Depending on the kit you may need a stock crank hub. Depending on the kit you may have an intercooler or aftercooler to remove.
After the disassembly:
You will need an air intake or air box
an elbow for the maf/throttle body
May have forgotten a thing or two, mainly just take off the aftermarket parts and re install the stock intake tract. Not too hard.
Why the f would want to go back to na... even if it is an sc
Sent from my SM-G960U using Tapatalk
Bookmarks