Didn't realize I hadn't posted the 6 speed...
Moving along...these are super light, it weighs, 15 lbs. Also, it has the logo stamp, hoping they are real...ha.
Part#
11627830660
11627830658
Last edited by M III; 04-27-2019 at 05:12 PM.
Hey, getting around to taking valves clearance measurements. Is this normal? Besides intake side, the exhaust measurements is kind of high and out of spec.
Intake from front to back
1 .008
2 .008
3 .009
4 .008
5 .009
6 .008
7 .009
8 .009
9 .009
10 .009
11 .009
12 .008
Exhaust from front to back
1 .015
2 .015
3 .014
4 .014
5 .014
6 .013
7 .015
8 .017
9 .014
10 .013
11 .017
12 .017
Also, took off the exhaust manifold.
Guess I should pull the stops and get the remaining bits. Been caught in some other matters, but definitely want the motor in this summer...still need exhaust gaskets, valve cover kit with shims, micrometer, low temp thermostat, selector rod, trans carrier, ps pulley, intake plumbing, ccv valve tubing, and debating over the bearings. I think that's it...
Ordered the exhaust gaskets, valve kit, low temp thermostat...will order the trans carrier and dssr next week.
Bookmarks