Hi,
Any clearance issues? Car is a 95M3, H&R OEM Sport Springs, Konis, Stock Brakes, 17x8 ET 40 OZ wheels, square set-up. I have no desire to roll the fenders.. It's basically street use with an autocross or two thrown in.
Thanks in advance!
'But Dad.... it's PURPLE!'
I run them on 17x9 ET42 wheels with no issues, so you will be fine. Haven't touched my fenders. I run a 12mm spacer in front to clear the struts, but you may not have to with 8 inch wheels and a lower offset. The rears will certainly be fine. Mine are a relatively tight fit at -2 degrees rear camber and a lower-than-stock ride height, but no rubbing and no fender roll. Your wheels are an inch narrower than mine, and my tires are also very wide 245's (among the widest non-slick).
Last edited by TostitoBandito; 06-01-2018 at 10:53 PM.
1999 M3/2/5 - Titanium Silver - Track/Weekend Toy
I run them on 17x8 et40. The 245/40/17 is the stock tire size for the M3 rear. Fronts fit just fine on the wheel specs I listed.
On 1995 M3s stock size is 235/40/17 front and rear. I did have 245/40/17 Pilot Sport 4s installed front and rear with the set up listed in my first post. No changes to alignment and no issues at all - even though tires are a tad taller. The tires are spectacular and I'd recommend them to anyone.
'But Dad.... it's PURPLE!'
Bookmarks