INPA seems to be working OK and I can read fault codes, see engine value, PDC, etc. But I can't clear my airbag light. When I try to access the airbag module I get: requested control unit: ACSM60/V3.00, ACSM85/V3.00, ACSM2/V1.00 SIM85 not found
My airbag info:
Control unit : Airbag ECU or Safety Info Module
ECU : D_SIM
JobStatus : OKAY
BMW part number : 6965147
Hardware number : 09
Software number : _?_
Supplier : Autoliv
Supplier-No : 58
Coding index : 4
Diagnostic index : 1376
Bus index : _?_
Date of manufacture Week/Year : _?_/1010
My B800 code reader says I have a swinging voltage error but it can't clear it. I removed the seats but the ignition wasn't on at the time. I also disconnected the battery when I fitted a multifunction steering wheel.
What can I do? Thanks for your help.
Solved it :-) You don't reset the airbag on a Z4, far too obvious. You go into the safety module and in my case reset the codes in the "satellite B pillar" (likely the connection to the seat). We live and we learn.
yes, there are several modules on those that can set the airbag light.
Current:
- 09 335i MSport, FBO.
- 98 Euro M3, Estoril Blue
- 04 M3, Carbon Black, 6 Speed Coupe
- 06 M5, Black on Black, Full Leather.
- 73 3.0CS, Tagia Green, 5 speed M30b35 converted
Ex's: 1984 325e, 1988 325IX, 1992 525I, 1995 540i/6, 2002 330i, 2005 330xi, 1992 850i, 2003 330i #1, 2003 330i #2, 2002 330ci, 2004 330ci, 2007 328CI, 2007 335i, 2001 M3, 2006 M5 6 speed
Bookmarks