Hi guys,
I've got a used Tilton 3 plate clutch + flywheel from a E34 M5.
The flywheel just bolts up to the crankshaft but the outer diameter of the starter toothing seems to be a few mm bigger.
Has anybody ever used a s38 flywheel on the m50? Which starter did you guys used? Will it work with the stock m50 starter or did you used the s38 starter motor?
Hi, i got a single mass M30 (E23 728i) flywheel on my M50. Literally it's the same FW as S38.
I have swapped toothed ring from M50 FW to M30 FW and worked like a dream.
M30 FW needs 0.5 or 1mm removal on the lathe to accept M50 toothed ring (which is slightly smaller inner diameter).
E30 325i '90 - M50B25 stock + ARP + HX52 + E85 = 651WHP
E46 330cd '04 M-Technic
E92 335i '10 M-Technic
Dynapack 2WD 1500HP Dyno
Hi,
i used the M30 flywheel + M30 starter. Plug n play
1982 E21 323i
M50B25 Turbo
Borg Warner S362 SX-E
ECU Master Emu
great guys, thanks for the info, I will just get an e34 m5 starter motor, buddy of mine has one flying around
Could you buy a used UUC blue FW ? I have one kicking around I think.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Thanks for the offer, but as I'm running a 7.25" triple plate clutch it wouldn't fit and I'm from Austria/Europe
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Sorry to bring this thread back from the dead...
I was running an S52 and Getrag 220 with a E28 533/M5 16 lb Flywheel (11221271463) This flywheel came on M88 & S38B35 engines, but is often swapped onto M30B33 engines.
Is this what you were using, Lamis?
It was running great for months, then the clutch came apart. A rotating part hanging off almost completely cut the transmission at the bellhousing in half. I have no idea what parts I selected that caused this. Do you have any resources about this setup?
Bookmarks