Hi,
Some people say that the M54B30 crank will foul a M50 block if swapped?
Why would it?
Does it happen?
Thank you.
Last edited by DannyKB; 05-03-2018 at 02:54 AM.
You can use an M54 3.0 crank and con rods with stock M50 pistons to make a stroker build. The camshafts are an upgrade for M52's and I believe fits M50's too. I think its the 3.0 exhaust cam that can be used as an intake cam. Slight modification may be required for the cam. Lots of info out there on it
Bookmarks