I have ISTA-D installed and working just fine. I found ISTA-P here: https://mega.nz/#F!5pIW1DyY!jYoL2TxwI1WyWfuudfN4nA and ran the full installation. When I try to open it I get this error and I cannot find any posts references how to fix it.
"Please install and register the ISPI Admin Client. Starting ISTA/P is not possible".
Any help is appreciated.
Thanks.
check out this page: http://obd2-diag.blogspot.de/2016/04...-download.html
I'm still working on the problem but this appears to get close to the solution - hopefully.
Wokke, Great job how did you get it to run?
How did you get it to work? I have installed ISTA/P version 3.65 and ISTA-D. My ISTA-D is work perfectly, but my ISTA/P when I open ISPI Admin Client and run the "Health Check" I get an error ISPi Client central server can be reached( it has a red X) . If I try to open the BMW.ISPI.TRIC.ISTAP.TrayApplication.exe from folder c:\programData\BMW\ISPI\data\TRIC\ISTA-P\BMW\Administration\TaurusAdministration
I get an error "the version 3.65.0.500 of the ISTA/P Application that you are using is no longer valid".
Thanks in advance for your help.
im new to this kind of stuff but what i am wondering is because im mainly concerned with using my k+dcan cable to read any codes my car maybe throwing as well as to watch the different sensors and see if i can see a problem of any kind no real coding or anthing like that is there a dumbed down version for that or is it pretty much all the same no matter what you want/ dont want to do with it?
Brett, I did this two years ago and I remember having to do something...I'll see whether I can find the notes that came with the software that I had purchased.
Last edited by NolliM3; 07-30-2018 at 08:21 PM.
Any one have any look with this
Hello, I have gotten INPA, ISTA-D to work correctly.
I have also installed ISPI Admin Client. However, when I launch ISTA/P it, I get the error "The device is not registered in the ISPI Admin Cleint. Starting ISTA/P is not possible."
When I attempt to launch ISPI Admin Client, it fails to connect to BMW Group and returns with the error"ILAC-007 Failed to reach Server".
Please advise, what can I do?
Bookmarks