My intentions were to build my e24 into a racecar, but due to not having time and thoughts that i will probably finish building it in a couple years with this pace i would rather part it out, most of this stuff was in my e36 track car previously. All parts are in my garage in Chicago IL I can ship at buyers expense.
I am posting to gauge up interest in what I have, I am a little bit negotiable on some parts but some of them have been barely used.
I will update the thread with pictures and some prices of each part.
m50 vanos unit that was purchased rebuilt and upgraded from vac, has about 5k miles - $150
m50 block recently cleaned and painted - offer
z3m s54 radiator - 75$
Federal fz-201 track tires, 265/35/18 squared. 6/32nds all around, 5 heat cycles - $200
24 lb injectors were freshly rebuilt then used for 5k ish miles - $40
m50 obd1 dme with RK-Tunes tune ( launch control, 3.5" maf, s50 cams, 24lb injectors ) - offer
3.5 540i Maf - offer
5spd getrag no grinds or pops, no leaks - $200
grip force chromoly flywheel and stage 2 clutch 5k street miles and 1 event - $200
g-force red 5pt camlock harnesses driver and passenger, red - $150 shipped to lower 48
m54b30 rotating assembly, pistons and crank - $300
s50 Cams with about 140k on them will include trays, $300 shipped to lower 48.
Will do a package deal for cams and crank/pistons $550
https://imgur.com/a/v6vMVR1
For faster response or specific pics 630-290-2347
Last edited by eagleeye635; 05-29-2018 at 06:57 PM.
Sparco seat for sale?
How much for clutch set up and flywheel shipped to NY 11772..
Thanks
I'm an Aussie living in the States , love it
Modestly dyslexic so for give the spelling.
Clutch, PP, flywheel still available?
"Be who you are and say what you feel because those who mind don't matter and those who matter don't mind."
-Dr. Seuss
DIY BMW Tools. Charlie For President
I assume the m54 rotating assembly includes rods?
99 M3 STU/ GTS3 Project
Bookmarks