Member
Just picked up a gopro fusion, this is my first video. Pretty stoked about just setting it up and capturing everything.
https://www.youtube.com/watch?v=Y9V4xbQC96s
Last edited by SM3; 04-27-2018 at 08:13 AM.
1998 Turbo M3 Nick G tuned setting 5 934Whp 849Wtq @27.88 Psi. ignite E90 setting 6=
Member
More specs on the build? T4 AR?
Member
T4 old steed speed manifold, S50 crank with 84.5mm bore forged with completely stock head. This run was at 15 psi I need to get it on the dyno for Nick G to make adjustments to the tune
Ring Master
Looks slow to me
Sent from my iPhone using Tapatalk
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
Member
To me too! It’s pretty slow for now it’s making around 550whpOriginally Posted by vollosso
Looks slow to me
Sent from my iPhone using Tapatalk
Cantry Member
So many old forgotten builds out there. Ones that inspired and taught us so much.
PS turn up the boost
Member
Thanks, I’ll be turning it up...So many old forgotten builds out there. Ones that inspired and taught us so much.
PS turn up the boost
1998 Turbo M3 Nick G tuned setting 5 934Whp 849Wtq @27.88 Psi. ignite E90 setting 6=
Member
What happened to the fancy head?
Member
Sitting in my garage. This is a small bore motor currently in the car so I cannot use that head. I am currently having the identical specs done on another head but for a small bore motor.
gotta build me another 86.5 bore to use it though that motor was a beast.
1998 Turbo M3 Nick G tuned setting 5 934Whp 849Wtq @27.88 Psi. ignite E90 setting 6=
Member
Did something happen to the old motor? That thing has seen some miles and passes if I recall correctly.
-sold...replaced by turbo e36
Member
Yes it had quiet a few miles. I ended up cracking cylinder 3 we believe heat related. That’s the only issue with making big power on 93 octane.
1998 Turbo M3 Nick G tuned setting 5 934Whp 849Wtq @27.88 Psi. ignite E90 setting 6=
Posting Permissions
Reply With Quote
Bookmarks