2002 525i
Passenger window only rolls up and down manually by turning my lights on, and rolling the interior dash and radio “light strength” dial all the way up. Also, the order of those events have to be in that exact order or the window doesn’t work.
When I start the car and try the window it’ll roll down by itself and won’t go back up unless I follow the above steps in order.
Been searching the forums but this seems like a very specific issue.
Thanks!
- - - Updated - - -
Here’s a video link to help explain:
https://youtu.be/5eQvWT4b3BM
Last edited by HONtoBMW; 04-24-2018 at 02:12 PM.
What is the battery voltage when this occurs?
Also, when this occurs, turn on the passenger visor light. If it has an affect, the iggy switch is likely bad.
Ed in San Jose '97 540i 6 speed aspensilber over aubergine leather. Build date 3/97. Golden Gate Chapter BMW CCA Nr 62319.
Voltage on startup is around 12.4
When I try to roll it up/down it doesn’t fluctuate.
Only when I do the lights+dial and roll it down does the voltage change, which I figure is normal.
I’ll try the visor light and let you know what happens.
Alright, operating voltage is 13.4-13.6.
Visor light has no effect
Bookmarks