Anyone know if the wiring harness inside the M3 side mirror is the same as the non-M ones or if anyone sells the harness for these?
BMW only has the mirror housing as a complete unit.
Motor and heated glass spades are all the same, so the harnass must be identical.
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
There are at least two different spade types for the heated glass, one big/small and one small/small ground/power. I don't know if this is an M vs non-M difference or just a rolling production change. All the motors I have seen have been identical with the same spades.
Looks like I'm either going to have to pull some junkyard ones or just make new harnesses.
1998 BMW M3 3.2 Cabrio Alpinweiί III on Schwarz German spec 1 of 12
SMG SRA PDC AUC OBC GSM HK UURS IHKA FGR MFL
IG: https://www.instagram.com/iflok/
Bookmarks