Transmission Mount Reinforcement Cups ...yes or no?

[Bostongruen]

I'll be doing my tranny mounts within the next week (UUC's black street compound) and was wondering what the consensus is in regards to using the UUC reinforcement cups. The write up on Rogue Engineering's site drags the notion of reinforcement cups through the mud so I was wondering what the consensus was among those of that might have first hand experience.

[TheJordanWhitte]

I had them for a few days but it was too harsh for normal driving, I have the blue ones now and it’s a good balance.

[Bostongruen]

It turns out that using google is far better at finding results on this topic / site than this site's own search feature. Apparently, the topic has been well covered. Since my motor mounts aren't exactly fresh, I'll be doing the E21 tranny mounts using the reinforcement cups.

[bluptgm3]

Apparently, the topic has been well covered. Since my motor mounts aren't exactly fresh, I'll be doing the E21 tranny mounts using the reinforcement cups.

Good choice.
I’m running stock with JTDesign STN Rings.
http://jtdesigns.stores.yahoo.net/stntranrine3.html


Sent from my iPhone using Tapatalk