SOLD
I have a complete set of 135i calipers they are from a 2008-2013 model. They are the Grey performance calipers. 6 piston front and 2 piston rear. Used pads with a good amount of life left included. I accidentally got two sets of calipers from eBay due to poor bidding strategy so I need to sell a set. The other set I am fitting to my 98 M Roadster. I can help answer some questions if anyone is interested in putting these on a different car. The calipers are complete and ready to go. The brake lines have been cut a few inches back from the caliper. They brake sensor cables are complete and useable. No signs of running hot or being overheated at any time. PM with questions, concerns, offers. Good upgrade for a lot of BMWs! Can send pictures if necessary.
I did some test fitting today. 4-21-18
The rear calipers bolt right up and fit nicely with E46 328mm rotors. A little trimming of the dust shield is needed for the caliper and then with the larger rotors the dust shield needs trimmed all around. The calipers are insanely close to the inside of my Roadstar 17" wheels but clear nicely with the spokes of the wheel. I am planning on moving up to a set of 18" E46 M3 wheels.
For the fronts. With the E46 M3 Rotors I need to shave about 2mm off the bracket on the caliper side. Then on the Hub side I need about a 1/4" spacer. My roadstars will need a 5-10mm spacer also. I need to see some measurements but I am hoping E46 M3 18" wheels will clear without spacers.
Pictures!!
post #4
Thanks
Location: Indianapolis 46202
Price: $850 shipped (48 US) obo
Condition: Used good condition
Email: FHill1381@gmail.com
Phone: PM for number
Paypal, ChasePay, Venmo, Google Pay: all accepted.
I have them listed on Ebay under the user name Z3M_V10tdi for $925 Shipped.
Last edited by Venom13132; 05-01-2018 at 08:27 AM.
1995 Mazda RX-7 Feed Widebody LS3 6-speed (Toy, project)
2010 Cadillac Escalade Luxury (Daily, Pulls my 18' car hauler)
2014 BMW 328d XDrive (Wife's Daily)
Have owned 4 other BWM's I no longer have.
Ugh, I want them so bad but budget for parts has been blown this season
FYI the rear fits e36 m3's without brackets but need e46 m3 rotors
Front you need a brakets but will fit oe size rotors (http://rebooteng.com/parts/bmw-135i-...ackets-e36-m3/)
you can do the fronts with e46 325mm rotors but you have to get those brackets or shave 3-4mm off the stock bracket. (which is the route i will likely go since I have access to a machine shop) I am going to test fit my set tomorrow and post up some pictures of the set i have for sale.
1995 Mazda RX-7 Feed Widebody LS3 6-speed (Toy, project)
2010 Cadillac Escalade Luxury (Daily, Pulls my 18' car hauler)
2014 BMW 328d XDrive (Wife's Daily)
Have owned 4 other BWM's I no longer have.
- - - Updated - - -
1995 Mazda RX-7 Feed Widebody LS3 6-speed (Toy, project)
2010 Cadillac Escalade Luxury (Daily, Pulls my 18' car hauler)
2014 BMW 328d XDrive (Wife's Daily)
Have owned 4 other BWM's I no longer have.
Sold
Last edited by Venom13132; 05-01-2018 at 08:27 AM. Reason: Sold
1995 Mazda RX-7 Feed Widebody LS3 6-speed (Toy, project)
2010 Cadillac Escalade Luxury (Daily, Pulls my 18' car hauler)
2014 BMW 328d XDrive (Wife's Daily)
Have owned 4 other BWM's I no longer have.
Bookmarks