Need some help. I have a misfire on cylinder 5. I noticed coil had melted replaced coil and new part plugs still misfire. Did compression check numbers are good. I have fuel. I did check for spark and there is none. I took coil off cylinder 5 and checked it to other cylinders i have spark. Any help would be greatly appreciated.
moved to E36 forum
SHOGUN'S TRICKS AND TIPS FOR THE SEVEN SERIES
http://twrite.org/shogunnew/topmenu.html
Wiring to coil is still ok?
BMW 320i '96 M52B20 OBD1 LHD European Model without A/C
BBS CH, Eibach Pro Street S suspension, Eibach Anti Roll Kit, Eisenmann 3" Exhaust, Wiechers Strut Bars (front/rear)
E39 M-sport MFSW (radio + CC)
I still need to check thst
I know i have power to coil
Try a new spark plug and see if that helps.
Has new spark plugs. I checked the ohms at plugs. All other coils have zeo at the signal wire going to dme,except 5 its reading. 744 ohms.
Bookmarks