Need to test wire and crankshaft sensors under hood and the Bentley say connect to battery negative. Can I assume any chassis metal surface is battery negative? Or something else is needed?
thanks.
jb
Chassis ground is a battery ground, the battery grounds directly to the body in the trunk, but under the hood there is a grounding lug on the rh side strut tower iirc
Sent from my SM-G892A using Tapatalk
Yep, its right beside the hood switch on the other side of the little wall from the positive
Current:
- 09 335i MSport, FBO.
- 98 Euro M3, Estoril Blue
- 04 M3, Carbon Black, 6 Speed Coupe
- 06 M5, Black on Black, Full Leather.
- 73 3.0CS, Tagia Green, 5 speed M30b35 converted
Ex's: 1984 325e, 1988 325IX, 1992 525I, 1995 540i/6, 2002 330i, 2005 330xi, 1992 850i, 2003 330i #1, 2003 330i #2, 2002 330ci, 2004 330ci, 2007 328CI, 2007 335i, 2001 M3, 2006 M5 6 speed
Germans just think the rest of the world could figure it out...yet they never actually provided a devoted negative post in order to attach jumper-cables!
Current:
- 09 335i MSport, FBO.
- 98 Euro M3, Estoril Blue
- 04 M3, Carbon Black, 6 Speed Coupe
- 06 M5, Black on Black, Full Leather.
- 73 3.0CS, Tagia Green, 5 speed M30b35 converted
Ex's: 1984 325e, 1988 325IX, 1992 525I, 1995 540i/6, 2002 330i, 2005 330xi, 1992 850i, 2003 330i #1, 2003 330i #2, 2002 330ci, 2004 330ci, 2007 328CI, 2007 335i, 2001 M3, 2006 M5 6 speed
Bookmarks