Koni Sport single adjustable struts, H&R “sport” springs, and SPC camber plates. No rear shocks.
The struts are both in good mechanical condition and fair cosmetic condition with surface rust and rubber residue. Koni Sport single adjustable: 8741 1272LSPORT and 8741 1272RSPORT (non-M). See https://www.amazon.com/Koni-8741-1272LSport-Sport-Shock-BMW/dp/B001GA07P6, .
The springs are in very good condition - H&R B/T springs 50424.55.F and 50424.55.R for mixed street and track use. Lowers 1.0” front and 0.5” rear. See https://www.amazon.com/50424-55-OE-Sport-Spring/dp/B00C7LMSKA/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523116847&sr= 1-1&keywords=H%26R+50424 .
The camber plates are Specialty Products Company (SPC) 72070 “BMW E36 Front Camber Kit is engineered utilizing a unique, multi-adjustable design, these strut mounts fit a wide variety of BMWs. It is for both performance and racing applications.” See https://www.amazon.com/Specialty-Products-Company-72070-Camber/dp/B000O3R5SS/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523117057&veh icle=1997-31-178-20---6-7-5771-169-1-1---5-0&sr=1-1&ymm=1997%3Abmw%3A328i&keywords=spc+camber+kit .
The spring isolators (rubber), bump stops, camber plates and springs are in good condition. I ran this setup on an E36 328i for 3 years, with mixed street and HPDE use.
$280 + shipping
Last edited by peterfontana; 04-08-2018 at 07:44 PM.
/
/
(typo.)
Last edited by peterfontana; 04-08-2018 at 07:45 PM.
These had been sold.
Thanks for your interest.
Bookmarks