Don't know what to make of this.
Recently, after running my car at 5500 rpms for a few minutes, and getting codes related to bank 1 with a rough running engine, I replaced the O2 sensor and the car was running well. I thought my problems were fixed, but messing around with INPA this evening I got the following codes, even though the 'check engine' light hadn't come on. Any thoughts?
INPA.png
Note: you have to click the image a couple times for it to be large enough to read.
Last edited by cngizbleevng; 05-06-2018 at 09:23 PM.
You had cleared the errors from before?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
See how it says "Error not available", those are historical stored errors. It would say "error present and current" if still valid.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Hmmm, well I thought I had cleared them. I did clear them tonight after taking those readings. I'll recheck in a few days and see if they reappear.
I would think both O2 sensors are in need of replacement.
Additionally, I would expect a period or re-adaptation that has to occur.
Sent from my iPhone using Tapatalk
Bookmarks