Results 1 to 4 of 4

Thread: Brembo 6-Piston 355mm Big Brake Kit

  1. #1
    Join Date
    Jan 2004
    Location
    San Francisco (Bay Area)
    Posts
    113
    My Cars
    E46 330Ci

    Brembo 6-Piston 355mm Big Brake Kit

    For sale is Brembo 6-Piston 355mm Front Big Brake Kit for the E46.

    Originally, it was a E46 330 BBK, but I bought the caliper brackets for the M3 kingpin when I completed my S54 swap. Kit ran just fine between the 330 and the M3 master brake cylinder. This sale includes both the caliper mounting brackets. The 330 bracket did get milled down in order to increase the tolerance between the wheel barrel and the caliper. The M3 bracket is unmodified and original.

    The reason I am selling the kit is because the car has turned into primarily a track car, so I bought the N15Designs Big Brake Kit to better fit the primary usage of the car.

    The negatives of this kit is the caliper surface facing the wheel barrel is scraped up from the tight gap between the caliper and the wheel barrel with my first wheel set. The positive is the surface visible behind the wheel spoke is in pretty good condition. The piston seals are in good condition as you can still see the letter printing on the seals.

    I have 79 photos, so I uploaded them up into my Flickr account to keep this post from being picture heavy. Links are posted below to the albums.

    Picture of the BBK Caliper and Hardware = https://flic.kr/s/aHskvCtDLk

    The brake rotors are Brembo Type III and have ~75% of rotor life.
    - New Thickness = 32mm. Minimum Thickness = 30mm.
    - Measurement Thickness of Left Rotor = 31.56mm
    - Measurement Thickness of Right Rotor = 31.53mm

    This sale includes the following brake pads:
    1) Hawk High Performance Street 5.0 (USED)
    - https://flic.kr/s/aHsm9ndqDL
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 16.13mm
    - Pad 2 Thickness = 15.97mm
    - Pad 3 Thickness = 16.15mm
    - Pad 4 Thickness = 16.12mm
    - Largest Pad Metal Backing = 5.9mm
    - Pad Life Remaining = ~92%
    2) Hawk High Performance Street 5.0 (NEW)
    - https://flic.kr/s/aHsmfpFBo8
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 15.95mm (I feel like I got ripped off on this one after this measurement. Lol.)
    - Pad 2 Thickness = 16.78mm
    - Pad 3 Thickness = 16.65mm
    - Pad 4 Thickness = 16.62mm
    - Life Remaining = 100%
    3) Hawk DTC-60 (USED)
    - https://flic.kr/s/aHskyJByuy
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 12.79mm
    - Pad 2 Thickness = 12.35mm
    - Pad 3 Thickness = 13.06mm
    - Pad 4 Thickness = 12.21mm
    - Largest Pad Metal Backing = 5.8mm
    - Life Remaining = ~58%
    4) Race Technologies/Brembo RE10 (USED)
    - https://flic.kr/s/aHsmgZGZoQ
    - New Pad Thickness = 17.00mm
    - Pad 1 Thickness = 15.11mm
    - Pad 2 Thickness = 14.86mm
    - Pad 3 Thickness = 15.05mm
    - Pad 4 Thickness = 14.86mm
    - Largest Pad Metal Backing = 5.7mm
    - Life Remaining = ~81%
    5) Brembo FM1000 (USED)
    - https://flic.kr/s/aHsmdobVV9
    - New Pad Thickness = 17.00mm
    - Pad 1 Thickness = 9.37mm
    - Pad 2 Thickness = 10.05mm
    - Pad 3 Thickness = 9.31mm
    - Pad 4 Thickness = (Missing, Sorry)
    - Largest Pad Metal Backing = 5.7mm
    - Life Remaining = ~32%

    Price: $2100 SHIPPED within continental 48 states and PayPal fee included. Zelle is also accepted.

    Location: San Francisco Bay Area, CA

    Left Caliper


    Right Caliper


    Brake Rotors


    Hardware (M3 Caliper Bracket Pictured)


    Hawk High Performance Street 5.0 (USED)


    Hawk High Performance Street 5.0 (NEW)


    Hawk DTC-60 (USED)


    Race Technologies/Brembo RE10 (USED)


    Brembo FM1000 (USED)

  2. #2
    Join Date
    Sep 2005
    Location
    EST
    Posts
    12
    My Cars
    E60 M5 LCI, E39 M5, E39
    Still for sale?

  3. #3
    Join Date
    Aug 2018
    Location
    Mississauga, ON, Canada
    Posts
    1
    My Cars
    2012 750LI & 2012 X5
    Hi there I was wondering if these will work for a 2012 750LI?

    Dennis

  4. #4
    Join Date
    Feb 2010
    Location
    San Francisco
    Posts
    130
    My Cars
    Tesla, mb
    Quote Originally Posted by ASAed330 View Post
    For sale is Brembo 6-Piston 355mm Front Big Brake Kit for the E46.

    Originally, it was a E46 330 BBK, but I bought the caliper brackets for the M3 kingpin when I completed my S54 swap. Kit ran just fine between the 330 and the M3 master brake cylinder. This sale includes both the caliper mounting brackets. The 330 bracket did get milled down in order to increase the tolerance between the wheel barrel and the caliper. The M3 bracket is unmodified and original.

    The reason I am selling the kit is because the car has turned into primarily a track car, so I bought the N15Designs Big Brake Kit to better fit the primary usage of the car.

    The negatives of this kit is the caliper surface facing the wheel barrel is scraped up from the tight gap between the caliper and the wheel barrel with my first wheel set. The positive is the surface visible behind the wheel spoke is in pretty good condition. The piston seals are in good condition as you can still see the letter printing on the seals.

    I have 79 photos, so I uploaded them up into my Flickr account to keep this post from being picture heavy. Links are posted below to the albums.

    Picture of the BBK Caliper and Hardware = https://flic.kr/s/aHskvCtDLk

    The brake rotors are Brembo Type III and have ~75% of rotor life.
    - New Thickness = 32mm. Minimum Thickness = 30mm.
    - Measurement Thickness of Left Rotor = 31.56mm
    - Measurement Thickness of Right Rotor = 31.53mm

    This sale includes the following brake pads:
    1) Hawk High Performance Street 5.0 (USED)
    - https://flic.kr/s/aHsm9ndqDL
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 16.13mm
    - Pad 2 Thickness = 15.97mm
    - Pad 3 Thickness = 16.15mm
    - Pad 4 Thickness = 16.12mm
    - Largest Pad Metal Backing = 5.9mm
    - Pad Life Remaining = ~92%
    2) Hawk High Performance Street 5.0 (NEW)
    - https://flic.kr/s/aHsmfpFBo8
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 15.95mm (I feel like I got ripped off on this one after this measurement. Lol.)
    - Pad 2 Thickness = 16.78mm
    - Pad 3 Thickness = 16.65mm
    - Pad 4 Thickness = 16.62mm
    - Life Remaining = 100%
    3) Hawk DTC-60 (USED)
    - https://flic.kr/s/aHskyJByuy
    - New Pad Thickness = 16.764mm
    - Pad 1 Thickness = 12.79mm
    - Pad 2 Thickness = 12.35mm
    - Pad 3 Thickness = 13.06mm
    - Pad 4 Thickness = 12.21mm
    - Largest Pad Metal Backing = 5.8mm
    - Life Remaining = ~58%
    4) Race Technologies/Brembo RE10 (USED)
    - https://flic.kr/s/aHsmgZGZoQ
    - New Pad Thickness = 17.00mm
    - Pad 1 Thickness = 15.11mm
    - Pad 2 Thickness = 14.86mm
    - Pad 3 Thickness = 15.05mm
    - Pad 4 Thickness = 14.86mm
    - Largest Pad Metal Backing = 5.7mm
    - Life Remaining = ~81%
    5) Brembo FM1000 (USED)
    - https://flic.kr/s/aHsmdobVV9
    - New Pad Thickness = 17.00mm
    - Pad 1 Thickness = 9.37mm
    - Pad 2 Thickness = 10.05mm
    - Pad 3 Thickness = 9.31mm
    - Pad 4 Thickness = (Missing, Sorry)
    - Largest Pad Metal Backing = 5.7mm
    - Life Remaining = ~32%

    Price: $2100 SHIPPED within continental 48 states and PayPal fee included. Zelle is also accepted.

    Location: San Francisco Bay Area, CA

    Left Caliper


    Right Caliper


    Brake Rotors


    Hardware (M3 Caliper Bracket Pictured)


    Hawk High Performance Street 5.0 (USED)


    Hawk High Performance Street 5.0 (NEW)


    Hawk DTC-60 (USED)


    Race Technologies/Brembo RE10 (USED)


    Brembo FM1000 (USED)
    Is this still for sale? I'm in Sf if so.

    Thanks

Similar Threads

  1. AP 6 Piston 14" Big Brake Kit for E36
    By XTNSIV in forum BMW Parts For Sale
    Replies: 16
    Last Post: 05-01-2005, 11:16 PM
  2. WTB: E46 M3 355mm Big Brake Kit
    By AEsco48 in forum BMW Parts Wanted
    Replies: 0
    Last Post: 10-25-2004, 12:42 PM
  3. NEW! Fitment diagrams posted for all UUC 355mm big brake kits
    By Rob Levinson in forum 1992 - 1999 M3 (E36)
    Replies: 3
    Last Post: 10-30-2003, 02:38 PM
  4. NEW! Fitment diagrams posted for all UUC 355mm big brake kits
    By Rob Levinson in forum 2001 - 2006 M3 (E46)
    Replies: 0
    Last Post: 10-30-2003, 12:52 PM
  5. For Sale: BREMBO 14" 355mm Big Brake Kit E36 E46 New!
    By dyllanc in forum BMW Parts For Sale
    Replies: 2
    Last Post: 05-14-2003, 12:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •