Page 8 of 12 FirstFirst 123456789101112 LastLast
Results 176 to 200 of 281

Thread: Big Power Manual Transmission (S6-53) Swap

  1. #176
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3


    Bolt kits for days. 33 bolts per kit. Plus washers/nuts/etc.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  2. #177
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  3. #178
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    I am very pleased to announce these have all shipped. Thank-you again everybody for being apart of this.

    Instructions will be up on the website today!
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  4. #179
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    I have been asked a few times where to source the transmissions.

    The easiest source is below, id recommend calling and talking with them.

    http://car-part.com/cgi-bin/search.c...erPage=1&iKey=



    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  5. #180
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    I would like to do a update about the transmission kit after having driven it some more!

    First, I am extremely happy.

    I can finally use third again. A hard 2-3 shift is unreal at 30+ psi, I almost forgot since I have been babying 3rd for so long.

    I took the car up to 80 mph I was at ~2800. This makes a huge difference in the overall cars highway-ability with all my stiff mounts. PLUS Zero vibrations from my franken-shaft.

    This transmission is very smooth even compared to the Zf 320.

    I much prefer this 6th ratio to the 420 ratio. I always found the 420 ratio a bit low for a 3.15, it was setup for the e46 3.64 rear end.

    I took the car through a drive-through today, just because I could.

    Once broken in the 1k clutch is very drive-able, leaving at 1500 rpm is more than enough for it to be smooth. So far it has broken in even further with every mile driven.
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  6. #181
    Join Date
    May 2015
    Location
    Methuen, MA
    Posts
    441
    My Cars
    1999 BMW M3 Coupe
    This is pretty dam cool. 335i tranny and clutch kit in 20 year old cars. Lol badass.


    PTE6262 .63 A/R, Stock S52, Cutring/Copper Spacer/Arp Studs Combo, Water Methanol Injected
    10.9@131mph. #AngerMotorsports

  7. #182
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Hey guys I know some of you are installing these. Here is the PDF on installing these: LINK
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  8. #183
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    I put down 950 wheel-torque today through the carbon graphite clutch combo that has been in my car for however long. The whole setup has performed flawlessly I am extremely happy.

    I’ll be back at the Dyno in a few months hoping to hit 1100whp w/ 46psi boost.

    The downside is I have destroyed two differentials already. The last one made it halfway through a single 3rd gear pull. I’ll be developing a 1000tq rearend solution with matching axles and driveshaft, this November. I’d like to be able to offer a bolt on drivetrain for serious power and I’m hoping this platform continues to grow in this direction because it continues to amaze me.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  9. #184
    Join Date
    Jun 2005
    Location
    New England
    Posts
    25,402
    My Cars
    F90 M5; E36 M3 Turbo
    That’s big power! With what driveshaft did you hit 950 lbs rwtq? And what diffs broke? E32 3.15 or E36 188mm?

  10. #185
    Join Date
    Apr 2014
    Location
    Greece
    Posts
    50
    My Cars
    M3 e36
    [QUOTE=vollosso;300884,

    I’ll be back at the Dyno in a few months hoping to hit 1100whp w/ 46psi boost.



    1100Whp with a 6870?Can we see the dyno-sheet with 950 wheel torque i am curious to see it.

  11. #186
    milKt's Avatar
    milKt is offline ßMW///MµrÐêr§þðr†
    Join Date
    Oct 2006
    Location
    Flaccid US Appendage
    Posts
    16,759
    My Cars
    95M3t 95M3 92525iT 95525
    Quote Originally Posted by M3turboE36 View Post
    1100Whp with a 6870?Can we see the dyno-sheet with 950 wheel torque i am curious to see it.
    Did a moderator comment on your "focus" on this contributing member earlier this year?
    Fishy.

    https://www.bimmerforums.com/forum/s...0#post29955790

  12. #187
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3

    Big Power Manual Transmission (S6-53) Swap

    Quote Originally Posted by pbonsalb View Post
    That’s big power! With what driveshaft did you hit 950 lbs rwtq? And what diffs broke? E32 3.15 or E36 188mm?
    I was using the 328i front shaft. Really never had much traction nor do I launch it. I think the combo there has saved it.

    They are 188s. I sold my 210 a while back because I kept saying I would do this other diff swap but things keep pushing it out hah. Honestly the 188s do okay, but 3rd gear pulls on the highway with that kinda boost at 4k is a tough life. I’ll post a graph but it’s like 800wtq by 4k.




    Sent from my iPhone using Tapatalk
    Last edited by vollosso; 09-02-2018 at 05:44 PM.
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  13. #188
    Join Date
    May 2015
    Location
    Methuen, MA
    Posts
    441
    My Cars
    1999 BMW M3 Coupe
    Quote Originally Posted by vollosso View Post
    I was using the 328i front shaft. Really never had much traction nor do I launch it. I think the combo there has saved it.

    They are 188s. I sold my 210 a while back because I kept saying I would do this other diff swap but things keep pushing it out hah. Honestly the 188s do okay, but 3rd gear pulls on the highway with that kinda boost at 4k is a tough life. I’ll post a graph but it’s like 800wtq by 4k.




    Sent from my iPhone using Tapatalk
    Holy crap. This is in an E36?


    PTE6262 .63 A/R, Stock S52, Cutring/Copper Spacer/Arp Studs Combo, Water Methanol Injected
    10.9@131mph. #AngerMotorsports

  14. #189
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by E36Mylo View Post
    Holy crap. This is in an E36?
    Yeah theres a bunch of videos floating around too.




    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  15. #190
    Join Date
    May 2015
    Location
    Methuen, MA
    Posts
    441
    My Cars
    1999 BMW M3 Coupe
    Quote Originally Posted by vollosso View Post
    Yeah theres a bunch of videos floating around too.




    Sent from my iPhone using Tapatalk
    That's nuts. Lol I can't even imagine what that feels like full throttle on the road.


    PTE6262 .63 A/R, Stock S52, Cutring/Copper Spacer/Arp Studs Combo, Water Methanol Injected
    10.9@131mph. #AngerMotorsports

  16. #191
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by E36Mylo View Post
    That's nuts. Lol I can't even imagine what that feels like full throttle on the road.
    Haha it’s pretty wild when it hooks. Full boost by like 4k on the road.

    Heck it is wild fast when it’s spinning.

    I should put a 4link and a solid axle in it, then it would really go.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  17. #192
    Join Date
    May 2015
    Location
    Methuen, MA
    Posts
    441
    My Cars
    1999 BMW M3 Coupe
    Quote Originally Posted by vollosso View Post
    Haha it’s pretty wild when it hooks. Full boost by like 4k on the road.

    Heck it is wild fast when it’s spinning.

    I should put a 4link and a solid axle in it, then it would really go.


    Sent from my iPhone using Tapatalk
    Yea I bet. I can't even imagine what that feels like. Ever tried the track? I wonder what something like that could trap. Easily 160+ mph


    PTE6262 .63 A/R, Stock S52, Cutring/Copper Spacer/Arp Studs Combo, Water Methanol Injected
    10.9@131mph. #AngerMotorsports

  18. #193
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by E36Mylo View Post
    Yea I bet. I can't even imagine what that feels like. Ever tried the track? I wonder what something like that could trap. Easily 160+ mph
    Driveline isn’t sorted enough yet. After I finish the new motor a driveline kit I’ll go send it




    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  19. #194
    Join Date
    May 2015
    Location
    Methuen, MA
    Posts
    441
    My Cars
    1999 BMW M3 Coupe
    Quote Originally Posted by vollosso View Post
    Driveline isn’t sorted enough yet. After I finish the new motor a driveline kit I’ll go send it




    Sent from my iPhone using Tapatalk
    I wanna see that lol that's going to get you kicked out and banned after 1 pass. Haha


    PTE6262 .63 A/R, Stock S52, Cutring/Copper Spacer/Arp Studs Combo, Water Methanol Injected
    10.9@131mph. #AngerMotorsports

  20. #195
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Quote Originally Posted by E36Mylo View Post
    I wanna see that lol that's going to get you kicked out and banned after 1 pass. Haha
    Oh absolutely.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53

  21. #196
    Join Date
    Jun 2011
    Location
    Vancouver, BC Ca
    Posts
    3,255
    My Cars
    1993 325is
    Quote Originally Posted by vollosso View Post
    Oh absolutely.


    Sent from my iPhone using Tapatalk
    Bring it to Mission here, about 2 hours north of Seattle. Fastest track out there. Like 10' above sea level. Lots of records here. I'll be there to watch if you come.

  22. #197
    Join Date
    Feb 2003
    Location
    Phoenix, AZ
    Posts
    3,201
    My Cars
    E36 M3/4/5 & E46 LSB M3
    I have an N54 tranny sitting in my garage if anyone is interested
    1997 BMW ///M3 - Estoril Sedan 5MT - M-Rain Interior (1 of 1)
    2001 BMW ///M3 - Laguna Seca Blue 6MT
    YouTube: (///Motorsport Throttle)
    https://www.youtube.com/channel/UCUM...pYSmibzy5YmUvQ

  23. #198
    Join Date
    Nov 2002
    Location
    Westchester, NY
    Posts
    326
    is this basically the same as the kit available at zionsville? what are the differences?

  24. #199
    Join Date
    Apr 2006
    Location
    Minnesota eh?
    Posts
    6,155
    My Cars
    86 325es
    Quote Originally Posted by vollosso View Post
    Oh absolutely.


    Sent from my iPhone using Tapatalk
    Mabey for trap speed. We’ll see on ET.


    86 325es, 2.8L m50, S476sxe, ProEFI 128 ecu, e85, solid rear axle, TH400 trans, 28x10.5w slicks, zip ties, popsicle sticks, tape
    best time 9.06 @ 151.8 mph, best 60 foot 1.30

  25. #200
    m3mods's Avatar
    m3mods is offline Boost Addict BMW CCA Member
    Join Date
    Sep 2011
    Location
    Seattle, WA
    Posts
    4,203
    My Cars
    AC Schnitzer S3 CLS
    Quote Originally Posted by RickyN F355 View Post
    is this basically the same as the kit available at zionsville? what are the differences?
    No that’s for a gs6-37bz which bolts on without an adapter plate and is rated for less torque.
    Attached Images Attached Images

Page 8 of 12 FirstFirst 123456789101112 LastLast

Similar Threads

  1. The Official Auto-to-Manual Transmission Swap Thread
    By TheBestCow in forum 1991 - 1999 (E36)
    Replies: 2915
    Last Post: 12-20-2023, 09:07 PM
  2. Manual Transmission/Rear Differential Fluid Swap
    By Johno in forum 1992 - 1999 M3 (E36)
    Replies: 16
    Last Post: 04-28-2018, 06:54 AM
  3. Replies: 30
    Last Post: 12-15-2016, 01:15 PM
  4. WTB: e30 manual transmission crossmember for swap
    By r4esh in forum BMW Parts Wanted
    Replies: 1
    Last Post: 01-06-2010, 10:52 AM
  5. Wanted: auto to manual transmission tranny swap parts
    By molszews in forum BMW Parts Wanted
    Replies: 8
    Last Post: 07-14-2005, 08:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •