I’m finishing up a cylinder head gasket job, on a 2006 BMW 330i manual transmission, i got all the T60(m10x125) in and ready to torque and yield.
My question is the I have 3 T50(m9x125) and 1 T50 (m9x95)
Where does the short one go, I took an educated guess in the rear right(I’d you’re look at it for the front of the car) towards the firewall
Thanks
Btw I wasn’t the one who removed the cylinder head
Last edited by Ytk3000; 03-31-2018 at 02:45 AM.
Go here and research the correct method for head removal/install
www.newtis.info
02 e39 540i Sport (Son), 01 DINAN 7 (Me), 12 e70 X5 x35i (Mrs), 95 e34 525i (Daughter 2), 01 e46 325Ci vert (Daughter 1)
"Insert cylinder head bolts M9x95 / M9x125 (11) to using the special tool (14) 0 495 026 (11 4 420)."
That's all I see, I've been to that website and it's really vague about the location.
Have never taken apart a 3L 6cyl, maybe visit/call a local BMW indy and ask, most are helpful.
02 e39 540i Sport (Son), 01 DINAN 7 (Me), 12 e70 X5 x35i (Mrs), 95 e34 525i (Daughter 2), 01 e46 325Ci vert (Daughter 1)
Bookmarks