Member
I've just got the DIS/SSS working via the diaghead emulator but when I start Progman somewhere along the way voltage in the upper right corner changes to 12.4.v. Needless to say, no programming can take place as I'm being prompted to hook in an external power supply of at least 13V.
This is a known software bug and I know there's a workaround somewhere.
I would greatly appreciate some advice about this
Is Enabled
BMW Tech Expert
Use winkfp and ncs expert.
Progman + unofficial tools = bricked modules.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Posting Permissions
Reply With Quote
Bookmarks