E36 M3 Stoptech Rear Big Brake Kit

[JPJ]

SOLD

Stoptech rear big brake kit for the E36 M3, or other E36's with M3 trailing arms. (potentially with different brackets could fit other models)

The Stoptech ST-40 (4 piston) calipers are huge! Look at photos showing this caliper beside a regular M3 caliper. Calipers are red, with only a few paint chips and scraps. They still look great, and behind wheels you wouldn't really notice any defects. Dust seals are in excellent condition. Pistons are 28mm each -- a good match to most front BBKs.

Rotors are 332mm (13") x 32mm. This requires 17" or larger wheels. The rotors have basically no wear. I went over them with a Scothbrite sanding disk. I always scuff the rotors like this when changing pad compounds to make sure they bed in properly. No pads are included. Comes with Goodridge stainless brake lines in good condition.

New this kit is over $2300 (and generally doesn't get discounted). SOLD

[lbennyboobool]

How much shipped to 72756?

[m3bs]

Does the parking brake work with those hats?

[JPJ]

Yes the parking brake does work with these hats which is really nice.

For shipping I can check tomorrow if there is some creative way to box it all up. If the rotors were 12" it would be easy -- that extra inch makes it more of a challenge to ship at a lower cost.

[pbonsalb]

It would not be good for drifting since it’s an aluminum hat, but the parking brake works for parking with the Stoptech rear calipers and rotors.

[JPJ]

Shipping to Arkansas from Michigan would be right at $70 (rotors in one box and calipers in a medium flat rate box.

Reduced the price to $950, so with $70 shipping and $30 if you don’t PayPal as a gift, it would be $1050 out the door.