I need some fresh eyes to look at this. I've been struggling with this for many months. Car dead in my garage. As video shows, all it does is sit and flap its valve with ingition "on". When you engage the starter, it "kicks" but thats it.
The Video:
Codes are:
005140 No message, receiver EGS, transmitter DME-DDE
00A3AD Message (engine data, 0x1D0) faulty, receiver KOMBI, transmitter DME-DDE
00E718 Message (engine heating current, 0x1B6) faulty, receiver IHKA, transmitter DME-DDE
005F76 DSC: Engine management: interface
Codes irrelevant to the problem (maybe?):
006140 AL: Redundancy comparison, driver steering angle (This fixes itself when you drive...)
00614A AL: Motor position angle not initialised (This fixes itself when you drive...)
00CE93 AL: Message (steering-wheel angle top, 0C8) (This fixes itself when you drive...)
00930C LM: Sidelight, front left, faulty
009324 LM: Supplementary turn indicator, right, faulty
codes.pngcan_bus_analysis.pngista_good_read.png
Forget it... ive had enough.
https://www.cars.com/vehicledetail/d...5235/overview/
Last edited by martinav; 03-02-2018 at 09:27 PM.
005140 No message, receiver EGS, transmitter DME-DDE
00A3AD Message (engine data, 0x1D0) faulty, receiver KOMBI, transmitter DME-DDE
00E718 Message (engine heating current, 0x1B6) faulty, receiver IHKA, transmitter DME-DDE
Thise look to have the same root... DME-DDE. What to do?
Bookmarks