hello to all
i need help with my central locking not working with p.a software this is what i get for codes=
ZKE -> 3D/01 - Central locking system: Short circuit or Open circuit at Motor Tailgate
30/02 - K-bus or Control unit for Instrument cluster basis (Gateway)
33/04 - Wiper: is blocking or Reset contact
2A/3F - Central locking system: Relay doesn't switch to on at Central saving
27/01 - Central locking system Relay Locking Driver's door: Contact for opening has open circuit or Contact for closing is sticking
Check the tailgate/trunk lid harness for breaks where it leaves the body and enters the gate/lid.
problem fix bad switch clear codes with inpa no more zke codes
Bookmarks