Starting E36 325iS Turbo build

[IISevv]

IÂ’m starting to buy parts for a turbo build and thought IÂ’d start a thread detailing the progress. The car is a 1993 Brilliantrot 325iS with 198k miles. M50 motor with automatic trans. It was in an accident with a salvage title so cosmetics are not my main concern. IÂ’ll be building the motor as a stroker as well as swapping a manual in. Here is my list of parts IÂ’ll be using so far. My reasonable goal is to put down 500 at the wheels with the chance to go farther. IÂ’m a college student so budget-wise I need to stop somewhere for now. If IÂ’m forgetting any important items or you have any tips, please comment.

Engine/Turbo:
-Ported TS GT35R 68mm-should have potential for 700 at the crank
-Wiseco M54b30 forged pistons
-Eagle M54b30 H-beam forged rods
-OEM M54b30 forged crankshaft
-Tial wastegate
-Turbosmart BOV
-Greddy Emanage Blue piggyback ECU
-Bosch 1000cc injectors
-255 L/PH FITech in-line pump
-Ebay intercooler kit
-Ebay turbo manifold
-S50 cams
-Turbosmart electronic boost controller

Transmission:
-ZF 5 speed manual
-FX Racing clutch and flywheel kit (for $350 itÂ’s worth a try and has good reviews on forums)

Miscellaneous:
-Widebody rear end with Hoosier drag radials
-Various engine gaskets and seals
-Half cage with buckets and harnesses
-Control arm and sway bar bushings