Hi all,
I plan on restoring my '00 M Roadster back to stock so parting out a few things and getting rid of some stock parts as well. And the following items will be available for sale soon.
Please note that the car is stored so I may not be able to take new photos, only photos from recent years. But I will try to be as descriptive as I can. I will entertain all offers as long as they are reasonable.
If you are local (San Diego, CA), I may be able to offer you installation for reasonable labour fees.
I will gather and post some recent photos soon.
Thanks!
----------------------------------
Remaining items
Hardtop complete set $2000 [LOWERED] (local pickup only)
There are some paint blemishes (but all cosmetics):
Two chips around edges where windshield meets the hardtop. Small paint cracks on hardtop bottom (by rear window and door windows) Flickr: https://flic.kr/s/aHsmbgZYm5
- OEM mounting hardware (part swap with non-hardtop version)
- Mounting torx screwdriver
- Store-away rack & dust cover, aftermarket from eBay Flickr: https://www.flickr.com/gp/156465360@N04/aoYUvR
AFE Wideband AFR Gauge $100
It comes with a custom built serial port cable to work with RomRaider, TestO, and other serial ported tuning SW
- Only used twice, never been mounted.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Last edited by nevan; 05-04-2018 at 10:28 PM.
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
I’m interested in the front carpets if you got them.
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
Interested in the headlights, sent you a PM!
Second in line for the headlights
WTB: Z3 M Coupe - G-Power front splitters, driver's side door panel
WTB: E36 M3 Coupe - CF Roof plug, LTW Spoiler
How much for the defrost switch?
Hey guys,
I just responded. I didn't disclose that mine was custom built by a local shop (no sky's brackets), and they are bit ghetto in terms of fit-n-finish. If that is still acceptable then let's talk. I will also add photos soon.
- - - Updated - - -
I wasn't thinking of selling it separately, sorry. But it could change, I'll let you know.
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
I added photo links to listing above.
Additional note that the lower beam adjuster (driver side) in the back of the assembly broke off while I was installing the SC. So it is fixated, and the low-beam level can only be adjusted by the mounting bolt.
Flicker: https://www.flickr.com/gp/156465360@N04/yAH126
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
I wonder if this blower setup would fit a m54 powered z3
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
That supercharger is tempting. I have to do some research. The pulley set was an upgrade. And the additional cooling components you suggest are included (cooler/rerouted) if going to smaller puller?
Sent from my iPhone using Tapatalk
Yes, all inclusive with asking price.
- - - Updated - - -
I am not too sure about m54 application. I would imagine it requires considerable alteration due to different manifold design, but I would let experts chime in... M52 would probably fit more comfortably.
Last edited by nevan; 02-22-2018 at 12:40 AM.
2000 Z3 M Titanium Silver / Imola Red+Black Nappa
2011 328i E92 Space Gray Metallic / Leder Dakota+Oyster
Since 1987 12 euros / 2 kdms / 2 jdms
- Zach
...I might have an M54 supercharger for sale soon.
"You don't win silver....you lose gold."
Bookmarks