Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 69

Thread: ///Mpower Vanity Covers

  1. 03-01-2018, 12:11 AM #26
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Thanks for all the guys who have sent me their paypal info, only missing one of you :

    To those who have replied i have sent invoices, check your PayPal.

    I went ahead and paid the deposit on these, I asked for one extra as a sample to be made upfront. Ill drive up to the shop and test fit it on my car and if anything isn't 100% we will correct it before hand.

    I asked him to quote it with laserguard and extra protection on the die so they come out perfect. 18ga is going to be nice guys.

    Im also quoting hardware for these and ordering it (probably) early next week. I want finger twist fasteners.

    Since these were over 600$ total they asked me to submit a w-9 to them, hah, I guess they are an above board shop.

    Evening guys.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  2. 03-02-2018, 09:00 AM #27
    NOTORIOUS VR's Avatar
    NOTORIOUS VR
    NOTORIOUS VR is offline Member
    Join Date
    Oct 2006
    Location
    Toronto, Canada
    Posts
    3,376
    My Cars
    E36 Turbo
    Exciting! Can't wait to get that on my Valve Cover!

    Thanks for doing this!
    Reply With Quote Reply With Quote
  3. 03-02-2018, 09:16 AM #28
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    Payment has been sent, sorry to be the one that was lagging lol
    Reply With Quote Reply With Quote
  4. 03-06-2018, 04:59 PM #29
    ba114
    ba114 is offline Member
    Join Date
    Mar 2016
    Location
    Australia
    Posts
    160
    My Cars
    e30 318i, 135i
    All paid. sorry, missed it in my inbox
    Reply With Quote Reply With Quote
  5. 03-06-2018, 07:59 PM #30
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    No problem guys!


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  6. 03-07-2018, 01:06 AM #31
    spenka's Avatar
    spenka
    spenka is offline LOUNGE Procrastinater!
    Join Date
    Jul 2011
    Location
    Dell Rapids, SD
    Posts
    1,654
    My Cars
    2-97 M3 sedan, 2015 STI
    Paid as well since last week. I just couldn't find the thread!


    Sent from my iPhone using Tapatalk
    THE TIME DRAWS NEAR!
    Reply With Quote Reply With Quote
  7. 03-08-2018, 06:28 PM #32
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Prototype done guys! May go look at it tomorrow if i can.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  8. 03-12-2018, 01:03 AM #33
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Picked up the prototype to make sure everything was 100% and I am more than satisfied. Sneak peak:

    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  9. 03-13-2018, 09:12 AM #34
    NOTORIOUS VR's Avatar
    NOTORIOUS VR
    NOTORIOUS VR is offline Member
    Join Date
    Oct 2006
    Location
    Toronto, Canada
    Posts
    3,376
    My Cars
    E36 Turbo


    Of course, you know what I just thought of... I have an OBD 1 cover on right now...
    Last edited by NOTORIOUS VR; 03-13-2018 at 09:13 AM.
    Reply With Quote Reply With Quote
  10. 03-13-2018, 02:02 PM #35
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    Quote Originally Posted by NOTORIOUS VR View Post

    Of course, you know what I just thought of... I have an OBD 1 cover on right now...
    switch it :P
    Reply With Quote Reply With Quote
  11. 03-13-2018, 03:07 PM #36
    NOTORIOUS VR's Avatar
    NOTORIOUS VR
    NOTORIOUS VR is offline Member
    Join Date
    Oct 2006
    Location
    Toronto, Canada
    Posts
    3,376
    My Cars
    E36 Turbo
    Quote Originally Posted by lbennyboobool View Post
    switch it :P
    I just finished switching to OBD 1 lol
    Reply With Quote Reply With Quote
  12. 03-13-2018, 03:16 PM #37
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    aw man that stinks!!
    Reply With Quote Reply With Quote
  13. 03-18-2018, 08:25 PM #38
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Hey guys, I corrected from the prototype last week and sent it back for the production run.

    The bolt holes needed to be shifted up about 1mm to pull the cover more square, I tested the hardware (I ended up going with more simple hardware) and it worked out great.

    Ordered nice boxes to get these to you guys safely.

    These were so nice I ended up ordering a handful extra. Really excited to get these to you guys.
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  14. 03-19-2018, 12:08 PM #39
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    It looks great on your car! I'm excited to get mine

    Thanks for all the work you've done to make this happen!
    Reply With Quote Reply With Quote
  15. 03-29-2018, 12:03 AM #40
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    Received the last revision today! Only had a minute to play with it, looks perfect.

    Im going to commission the remaining units tomorrow and get them to you guys. Pretty excited.



    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  16. 03-29-2018, 09:46 AM #41
    NOTORIOUS VR's Avatar
    NOTORIOUS VR
    NOTORIOUS VR is offline Member
    Join Date
    Oct 2006
    Location
    Toronto, Canada
    Posts
    3,376
    My Cars
    E36 Turbo
    Quote Originally Posted by vollosso View Post
    Received the last revision today! Only had a minute to play with it, looks perfect.

    Im going to commission the remaining units tomorrow and get them to you guys. Pretty excited.



    Sent from my iPhone using Tapatalk
    Yes boi
    Reply With Quote Reply With Quote
  17. 03-29-2018, 12:48 PM #42
    NY98M3's Avatar
    NY98M3
    NY98M3 is offline BFC Fire Marshal
    Join Date
    Jul 2002
    Location
    Long Island, NY
    Posts
    7,523
    My Cars
    98 Turbo M3, 04 E53 X5
    Make one for an OBDI VC?

    98 Fern Green M3/2 - Precision 6870/AR Designs Twin Scroll/RK/E85
    2017 Toyota Tundra Crewmaxx - Family Whip
    2011 Pierce 75' Quint - Fire Apparatus West Islip FD
    Reply With Quote Reply With Quote
  18. 03-29-2018, 12:57 PM #43
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3

    ///Mpower Vanity Covers

    Quote Originally Posted by NY98M3 View Post
    Make one for an OBDI VC?
    Haha thats the question.


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  19. 03-29-2018, 02:08 PM #44
    mjungbluth's Avatar
    mjungbluth
    mjungbluth is offline Member
    Join Date
    Jul 2012
    Location
    Tucson
    Posts
    314
    My Cars
    1994 BMW e36 conv.
    Quote Originally Posted by vollosso View Post
    Haha thats the question.


    Sent from my iPhone using Tapatalk
    Do it, por favor!


    Sent from my iPhone using Tapatalk
    Reply With Quote Reply With Quote
  20. 03-29-2018, 07:44 PM #45
    NOTORIOUS VR's Avatar
    NOTORIOUS VR
    NOTORIOUS VR is offline Member
    Join Date
    Oct 2006
    Location
    Toronto, Canada
    Posts
    3,376
    My Cars
    E36 Turbo
    Quote Originally Posted by vollosso View Post
    Haha thats the question.


    Sent from my iPhone using Tapatalk
    Ugh... if you do, put me right on the list for one of tho's too... FML
    Reply With Quote Reply With Quote
  21. 03-29-2018, 11:07 PM #46
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3
    https://instagram.com/p/Bg7MvCyhm9w/


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  22. 03-30-2018, 01:23 PM #47
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    Quote Originally Posted by NOTORIOUS VR View Post
    Ugh... if you do, put me right on the list for one of tho's too... FML

    me too
    Reply With Quote Reply With Quote
  23. 03-30-2018, 06:02 PM #48
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3

    ///Mpower Vanity Covers

    Commissioned the rest... uploading pictures now :devilook


    Sent from my iPhone using Tapatalk
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  24. 03-30-2018, 06:10 PM #49
    vollosso's Avatar
    vollosso
    vollosso is offline Ring Master
    Join Date
    Mar 2012
    Location
    Renton, Wa
    Posts
    5,429
    My Cars
    98 m3



















    Notice, I didn't tighten the hardware all the way down here as I don't want to scar this guy up. When you tighten it they end up laying flat.
    1989 535i - sold
    1999 M3 Tiag/Dove - sold
    1998 M3 Turbo Arctic/black - current
    2004 Built motor TiAg/Black - Sold
    2008 E61 19T Turbo-Wagon - current
    2011 E82 135i - S85 Swap - current
    1998 M3 Cosmos S54 swapped Sedan - current

    1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
    Reply With Quote Reply With Quote
  25. 03-30-2018, 09:13 PM #50
    lbennyboobool
    lbennyboobool is offline Member
    Join Date
    Feb 2016
    Location
    Rogers AR
    Posts
    4,426
    My Cars
    1995 BMW M3
    looks amazing!!!

    Sent from my 2PYB2 using Tapatalk
    Reply With Quote Reply With Quote
Page 2 of 3 FirstFirst 123 LastLast
« Previous Thread | Next Thread »

Similar Threads

  1. S52 "MPOWER" VANITY COVER - No Longer Available
    By vollosso in forum Exterior Lighting & Body Parts
    Replies: 3
    Last Post: 12-10-2014, 02:53 AM
  2. MPower Vanity Covers, S50 and S52
    By Ragnorak in forum Engines, Performance Parts & Software
    Replies: 7
    Last Post: 01-17-2013, 11:37 AM
  3. Mpower valve cover covers for m50/s50 obd1
    By Thewiseguy in forum BMW Parts For Sale
    Replies: 11
    Last Post: 09-27-2005, 01:57 AM
  4. FS: obdI BMW MPOWER engine cover and Scroth harness
    By magillicuddy189 in forum BMW Parts For Sale
    Replies: 3
    Last Post: 10-21-2004, 11:02 PM
  5. $60 for BMW MPOWER Engine Cover for sale
    By D Unit in forum BMW Parts For Sale
    Replies: 14
    Last Post: 06-30-2004, 10:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules