Window regulator track pulled off

[someguy79]

The window regulator track on my 1996 328i pulled off of the right rear window glass. Please let me know how to properly reattach it.

[bluptgm3]

Most likely need a couple of these replacement clips, p/n 51-32-1-938-884.

https://www.ecstuning.com/b-genuine-...kaAtEnEALw_wcB


Sent from my iPhone using Tapatalk

[someguy79]

The aluminum track pulled away from the glass. The plastic slider and clip are in ok condition.

[guymandude]

I would try urethane window sealant

[someguy79]

FYI the dealer recommended using a two-part epoxy.

[zohaibrose]

had this issue too first things first if the metal clip is missing or if the plastic slider piece is broken that could be a fault, if they are fine then check if the window is in the guides in the front and back because if not the window will keep falling off the regulator ball joint,

[JDStrickland]

http://www.realoem.com/bmw/enUS/show...diagId=51_2121

Item 2 is the object of your desire. Sorry, I lied, this is the front door, the rear door may be different.

Unless the window regulator is bent, the only thing that can happen is that Item 2 breaks, or the metal clip falls off, which only happens if Item 2 breaks. YOU MUST LOOK UP THE RELATIVE PART FOR YOUR CAR, THIS DIAGRAM IS FOR MY 'VERT.