Hey guys I'm going to be doing a manual swap soon, pulled a lot from my donor, but I'm missing the clutch master and pedal assembly... Does anyone have a set?
Also is the 328i driveshaft the same on coupes and sedans ?
Driveshaft is the same for coupe and sedan. Also an m3 driveshaft will work, and vise versa, as long as it has the same diff flange. (4 bolt u-joint or 6 bolt cv joint)
There is a 2 pin plug on the auto trans that you should keep so you can splice it in for the reverse light switch. Its the same plug but you have to splice ot in off the plug at the shifter.
You will also want to keep the clutch switch. Splice that in to the neutral safety switch so you can start the car when clutch is pressed.
Last edited by guymandude; 02-16-2018 at 10:13 PM.
Bookmarks