Hi dear Forum,
i am going to program my ECU BMW e38 740D, with changesv2.iso its going to stock at CKM save (i am waiting about 2 hours)
I read that it would be ok if i am use fullstart.iso.
and here the question, have anzbody his file?
Greatings Jakub
What exactly are you trying to accomplish?
Hi Chris, i have read out my ECU Data with MPPS, something went wrong and now my car is not starting. I want to update the ECU and make a DDE-EWS sync and hope the car will start.
DIS or ITSA would be a better choice than Progman for doing this. I never really liked Progman, it makes DIS seem fast.
Or really, just use WinKFP
THX i tried both solutions, Progman and WinKFP. Master ECU i could bring back to life, Slave is dead
Start looking into BDM... If WinKFP won't do it, neither will Progman or any other BMW program.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Hi,
since about 1 week i tried everything to start the car. I have flashed both ECUs with Galletto, and again i get this 99999 numbers in Inpa and DIS write that ECU and DDE can not be synchronized, the Part Numberts do not match. here the picture from Inpa i can post my eeprom dumbs if needet. Have anybdy an idea?
unnamed.jpg
If you need your ECU repaired PM me. Car will start in one shot guaranteed
Buy my native installed ISIS ISTA-D/ISTA-P bmw diagnostic laptop. More Info Here!
Bookmarks