DINMANN CUSTOM CARBON FIBER HONEYCOMB STEERING WHEEL




The wheels are rebuilt with carbon fiber and new perforated leather or optional (alcantara)


2x2 3k carbon fiber top and bottom
- Flat bottom re-design
- Centered Colored Ring on top to the 3 ///M color
- Black Perforated leather on both sides with 3 ///M color stitching


Finish:
2×2 Carbon Weave.
Gel coating finish with a clear UV protective coating.


DINMANN CUSTOM CARBON FIBER STEERING WHEEL




2x2 3k carbon fiber top and bottom
- Flat bottom re-design
- Centered Colored Ring on top to the 3 ///M color
- Black Perforated leather on both sides with 3 ///M color stitching


Finish:
2×2 Carbon Weave.
Gel coating finish with a clear UV protective coating.


M-DCT DUAL CLUTCH CARBON FIBER GEAR SHIFT LEVER




This is no better way to change the look of you BMW than adding carbon fiber accents. this is a full replacement Carbon Fiber gearshift lever cover made specifically for all BMW M-Series Vehicles equipped with the M-DCT Dual Clutch Transmission. These gearshift levers are made with an ABS core and hand laid with genuine 2x2 Twill Weave Carbon Fiber, finished off with a UV-resistant high-gloss clear coat. For those who have the factory Carbon Fiber Interior Trim, this piece will elegantly match your existing trim pieces perfectly. Because these are made specifically for F-Chassis vehicles equipped with the M-DCT Dual Clutch Transmission, fitment is guaranteed to be impeccable.


Installation is fairly straightforward, but it does require removal of certain center console pieces. Professional installation is highly recommended due to the exquisite nature of the installation process. This piece will require you to swap over your existing gear selector face plate onto it.


Finish:
2×2 Carbon Weave.
Gel coating finish with a clear UV protective coating.


OEM STEREO TRIM REFINISHED IN CARBON FIBER


This is no better way to change the look of you BMW than adding carbon fiber accents. Our Stereo – A/C is the best choice. We use an OEM piece and skin it in carbon to make fitment guaranteed!
***Each piece is proudly designed, made and hand-laid in the United States designed for an excellent fit and finish***


Finish:
2×2 Carbon Weave.
Gel coating finish with a clear UV protective coating.


BACK SEAT CARBON FIBER COVERS




Material:
Highest quality carbon fiber woven fabric at; 2×2 3K


Finish:
Gel coating finish with a clear UV protective coating.


BACK SEAT CARBON FIBER FULL COVERS




Material:
Highest quality carbon fiber woven fabric at; 2×2 3K


Finish:
Gel coating finish with a clear UV protective coating.