Um.... help - wiring question

[kidtofu]

So my right rear tire blew out the other day and ripped out a bunch of wires. I know it went to the brake pad sensor and speed sensor. But like I said it ripped out and can figure out which wire goes to what. Can someone assist me with a wiring diagram if there is one. I looked for one and can't find.

Thanks

[jclausen]

the question is are the connectors still in place at the chassis end, if they are then by the parts you need and I think you will be able to figure it out. If the connectors were ripped apart you will have to get new connectors thru BMW and repair as needed

[kidtofu]

the question is are the connectors still in place at the chassis end, if they are then by the parts you need and I think you will be able to figure it out. If the connectors were ripped apart you will have to get new connectors thru BMW and repair as needed

That's the thing. The connectors aren't there. The wires are just dangling there. I would show you a pic but it won't let me post a pic

[MauiM3Mania]

.... I would show you a pic but it won't let me post a pic

Until you build up your post count, that will be the case. You could put you images on a image hosting site and link to them in your posts. Do avoid imgur.com and photobucket.com if you take this route.

[NoQuarterX]

Just order a brake sensor cable and speed sensor cable.

You do not need a wiring diagram to figure this out.

[jclausen]

There are wiring repair listed in section 61 for abs sensor, but I don't see a brake linging sensor repair kit.