Another couple products are up, most notably our M60 underdrive pulleys! https://www.angryasssolutions.com/pa...rdrive-pulleys
We still have 17 fire extinguisher brackets on sale!
Hey chaps.
Didnt realise u have a PS smaller pulley.
Do so I have to put some sort of code or is all easy.
Delivery is a killer to this part of the world
BMW’s
90 E34 M5
84 E24 M635csi standalone ecu with coil on plug
94 E34 540i/6 SC 5-17psi Flex fuel/standalone ecu
97 Z3 2.8
97 E36 M3 euro SC still u/c
OTHERS
11 Audi S5 APR stg2
19 Volkswagen Amarok V6
Gaz, we have pretty good rates to AUS via USPS. The extinguisher bracket (and actually, pulleys) can fit in very small boxes, tightly wrapped in protective material. A safe bet is under $80 shipped to your door.
The discount on the bracket is automatic! No effort or code on your part, good sir.
Ok cool. Some more power steering effort is probably not a bad thing. I’ll sort it shorly. Thanks again.
BMW’s
90 E34 M5
84 E24 M635csi standalone ecu with coil on plug
94 E34 540i/6 SC 5-17psi Flex fuel/standalone ecu
97 Z3 2.8
97 E36 M3 euro SC still u/c
OTHERS
11 Audi S5 APR stg2
19 Volkswagen Amarok V6
What are the benefits of such pulleys?
Anything for the V12 M70?
Only went the power steering as I prob need to hang on to all the cooling I have.
BMW’s
90 E34 M5
84 E24 M635csi standalone ecu with coil on plug
94 E34 540i/6 SC 5-17psi Flex fuel/standalone ecu
97 Z3 2.8
97 E36 M3 euro SC still u/c
OTHERS
11 Audi S5 APR stg2
19 Volkswagen Amarok V6
Sunroof clips!
We gonna make 'em.
We're thinking $7 apiece. They will be milled out of potentially Teflon or polyethylene; per usual, the cheapest way to produce this component will likely result in a stronger part than conventional methods, like injection molding.
Stay tuned!
Order received, good sir- funny thing is you most likely already have the water pump pulley we sell! I'm not sure if it was all Euro-spec, or what an AUS car would receive. Either way, look for tracking in a confirmation email later today. And thank you!
I saw Greg post about an updated pulley design for the S38 on Instagram. Any details?
Current Fleet:
E34 1991 M5 Macaoblau on Complete (ruined)Leather Champagne - http://forums.bimmerforums.com/forum....php?t=1705166
Past:
E34 1989 535i 5-Speed AlpineweissII on Natur - Parted
E34 1992 525i 5-Speed Islandgrun on Pergament - Parted
E34 1995 540i 6-Speed ShwarzII on Shwarz - Sold to Sneezy.
E34 1995 525i 5-Speed Calypso Red on Parchment - http://forums.bimmerforums.com/forum....php?t=1748143 - Sold locally.
E39 1998 528i 5-Speed Black on Black - Sold locally.
E34 1993 M5 Alpinweiss on Black - http://forums.bimmerforums.com/forum...lpinweissII-M5 - Parted
Andre, we will make anything if someone will buy it
For low volume custom stuff, we have found we need to take deposits to ensure buyers are committed. We are doing this with our E34 race seat brackets now. The more buyers we have for a product, the lower we can make costs and pass savings onto buyers.
One problem for M70 is that we would not have a local test-fit car! If you would like, I can start a thread and try to find more M70 owners. E38/E31 I guess?
I have a m70 you can r&d on. Greg is gonna be the new owner shortly lol
Because tomorrow is our favorite holiday, and we think America is #1, and we make everything right here in the U.S. of A., Angry Ass Solutions has a 15% off blanket thrown over the entire website!
15% off anything from 0001 hours July 4th, until 2359 hours Friday, July 6th.
Use code "1776"
Another idea for a part: foglight switch delete interior cover?
We've had more fanfare on M5board about this, for obvious reasons, but we are happy to release our full S38 Secondary Air Injection delete kit! After 1500 test miles and a few revisions of the tensioner, we are ready to ship:
https://www.angryasssolutions.com/pa...-delete-plates
Since most M5 owners that have binned their Secondary Air Pump, now use what is essentially a lawnmower belt to drive their A/C compressors, we have a special discount code for buyers of our product who send us a photo of their old bump-on belt (NAPA 4L330, anyone?) cut in half!!!
Bookmarks