Looks like there was a pressure accumulator on cars before October 1993:
Just an update to this project.
Working on v1.5 and made some adjustments to account for the slightly different pump placement in the sedan.
We recently installed this in a local car for a friend to verify fitment, etc.
Just about everything is done, other than putting together the kits and bending each of the lines.
Should go into full production within the next 30 days or so.
Pricing for these is going to be set at $159.99 and will include shipping to all 50 states including Hawaii and Alaska. International shipping might be possible, but we would have to speak about this first to account for the additional costs.
The biggest thing I'm still waiting on is how I plan on handling protecting myself legally, so we'll see how that goes. Also need to finalize instructions for install. Should be fairly straightforward and any performance or race shop should have no issue installing this part.
Some shots of the recent install of this kit on a local E36 M3 sedan:
Here's the hardware:
Here is basically what you will receive when the part arrives (instructions are not shown in this picture):
Made some final test fits and adjustments to the jig last night. Just waiting on some parts from one of my suppliers and should be able to move forward with finalizing the instructions and legal disclaimer.
For fun, I took a time-lapse video of line bending last night:
After some research and consideration, I've decided against making this ABS bleed line kit available for the community.
I originally set out to solve my brake problem and then saw an opportunity to help others with the same issue. While I considered the design challenges, I thought it would be fun to see if I could actually do this and make it into a full-fledged thing. I have no experience with any real fabrication, manufacturing or business so to me it was an exciting new thing to try my hand at. As I got deeper into it, I began to see the potential legal implications that could arise if someone happened to be killed or seriously injured due to this part.
As a simple hobbyist, I don’t have insurance or any form of business protections such as an LLC to protect my personal assets in the event of legal action taken against me. I looked into it a little bit and discovered that the LLC taxes and insurance are too high of an investment to protect myself legally. The volume of sales needed to offset the cost is not tenable. I'm not confident enough that disclaimers and signed waivers will suffice, so I’ve decided to only offer these kits to friends for the time being.
If anyone is interested, I might be willing to sell the entire project (jig, materials, intellectual property, designs, supply chain, etc) to you or someone you know that would be interested.
Sadly, this is the environment we have here in the US so I have to play the game and simply do what’s prudent.
Apologies to anyone that was seriously interested and had been looking forward to picking up one of these.
Last edited by golgo13; 01-30-2019 at 07:42 PM.
Understandable in this sue-happy era we're in.
Yes, unfortunate but understandable.
Anyone who still wants to fit an ABS pump remote bleeder can refer back to post #34 in this thread. The parts listed are race quality and built for high pressure hydraulic applications, while the flex hose is custom configured and pressure tested in a Goodridge approved shop. Total delivered parts cost from Pegasus with tax and shipping would be around $80, depending on where you live. As many people will know, Goodridge is a well-known supplier of aftermarket stainless steel braid brake hoses for street and race applications. You purchase and assemble the parts yourself and take responsibility for the result.
Assembling your own bleeder hose and adapters is very similar to installing caliper brake hoses — actually easier in most respects. All you need beyond that is brake fluid and a bleeder, plus normal hand tools, shop supplies and some common sense.
Neil
Last edited by NeilM; 02-19-2019 at 08:52 AM.
Neil has a great and affordable solution.
Modify your car at your own risk.
I'm so happy I found this thread, tons of good info and ideas in here. Has anyone else used Neil's solution? If so, what were the results? How about the S2000 method?
Bookmarks