I used the reboot engineering M50 aluminum adapter. The OEM rubber neck was on this one but I've also used MaxPSI hoses too. http://rebooteng.com/parts/m50-intake-manifold-fitting/
Last edited by Braymond141; 02-26-2018 at 08:13 PM.
Turbo car, swapped m52 to m50 intake. Went from 450hp at 20 psi to 530 at 21 psi? (Somthing like that)
Seems like the m50 is well worth it if your boosted.
https://youtu.be/FsqZiWxLI8M
Tips for m50 manifold + f/I.
https://youtu.be/cYoU6axywXU
Last edited by Sio2crew; 05-01-2022 at 11:45 AM.
These are pretty good,
If you get the RallyRoad version, make sure you ditch the zip tie that comes with it.
https://rallyroad.net/collections/fo...ld-icv-fitting
Replace Zip Tie with a skinny SS Hose clamp. My zip tie stretched and allows the barb O-Ring to break seal when the barb gets to a certain angle inside the ID of the M50 port. It's due to only having 1 attachment holding the thing together.
Bookmarks