Hi
I took the car to the garage to get the M air flector .
Is it correctly installed?
That is where it goes. Whether or not it has all the plastic rivets in place is hard to tell, but it looks right.
Desecrator of all things Sacred
Looks about right, it is bolted in two places to the radiator hanger plus 5 plastic rivets.
Timm..2007 E64 650i Individual Sport..1999 E31 840ci Individual Sport..ex owner of 2000 E38 740..1999 E38 740i V8 M62..1998 E38 735i V8..1993 E32 730i V8..1988 E28 518i
My BMW Repair YouTube Channel
My Current 840ci Sport Individual
My Current 650ci Sport Individual
My E31 Repair and Information Website
My E38 Repair and Information Website
My E63/E64 Repair and Information Website
Chase - Heroes to a generation
If the rear is going upwards, It's probably correrct as the air gets thrown in the upwards direction.
I mounted mine to fit under the front chin. It seems to have a bit of pressure upward, but no issues. No gap that way.
What "thumbs up" really means
Brilliant! Thanks a lot for feedback.
I will post some decent pictures. Beside refrigeration it will stop seing a ‘hole’ in the lateral shots.
there is also a rubber strip under the lower lip...... (after a few speedbumps it's gone, bought a new one and kept it in the box).
BMW 850 CSI march 1994 (EU spec), SOLD. https://www.classiccars-forsale.com/...94-bmw-850csi/
BMW 850 CSI november 1994 (EU spec)
Nonsense. Maybe if your car is lowered. If you install everything correctly and securely, it will be fine.
It's just a rub strip - it's there so the bumper doesn't take the damage. Lots of cars have them.
Last edited by toomanyparts; 01-20-2018 at 06:11 AM.
What "thumbs up" really means
Hard to tell, but did you also get the CSi deflector to the lower radiator? It is different than the stock one. I have a lowered 850 and have no issues with the black rubber strip on the bottom.
'93 850Ci - Mineralweiß Metallic
2001 740iL - Titansilber
ALPINA B7 -Alpinweiß III
...the price of cool ain't cheap!
I bought complete kits, I and others on Roadfly had issues with the spoiler grabbing things it came in contact with until removal, Most of are cars were lowered beyond 1.5 inch, After removal of the strip, The spoiler was more forgiving with things like parking blocks etc...
Timm..2007 E64 650i Individual Sport..1999 E31 840ci Individual Sport..ex owner of 2000 E38 740..1999 E38 740i V8 M62..1998 E38 735i V8..1993 E32 730i V8..1988 E28 518i
My BMW Repair YouTube Channel
My Current 840ci Sport Individual
My Current 650ci Sport Individual
My E31 Repair and Information Website
My E38 Repair and Information Website
My E63/E64 Repair and Information Website
Chase - Heroes to a generation
Hi
thanks for advice. Finally I did not install it (the lip below). With time though and I guess with some of those bumps near schools... the right side seems not secure so I bought the additional pieces that go on each side of the csi low bumper.
Does anyone have the installation guide, I recall downloading but I have lost it... and as I would ask from a Service center to do, I would like to take the pieces with the instrucions.
Thanks
You do not need to go to the other side of the pond for this... Just ask the right guy at this side... :-P
CSi Parts Steve Castle att117.pdfCsi Front Spoler install att177.pdfCsi Nose Removal.pdf
Last edited by dudu850; 05-17-2019 at 01:08 PM.
thanks Dudu...
More help below with another pdf file:
Last edited by 8eights; 05-19-2019 at 02:18 PM.
Thanks 8eights¡
Bookmarks