I am thinking about modifiying Throttle bodies to have a 2mm larger bore and flapper allowing more airflow. What are your thoughts?? . Cost would be Probably $125 plus return shipping
Last edited by Bert Poliakoff; 10-25-2018 at 07:06 PM.
81 Euro undergoing total nut and bolt restoration
pictures at: flickr.com/photos/bertsphotos
Sure you are not referring to the throttle body? Just wondering how that would be done on a AFM since it has a rectangular cross section where the flapper is. Also, what would that do to the output/calibration for air flow?
Sent from my SM-G900V using Tapatalk
I'm in for at least one.
Sent from my HTC6545LVW using Tapatalk
Not enough of an engineer to do the calculations . What I will be doing is to take the spare I have and having the mods done and see how it physically looks. If i am satis fied at that point I will go ahead with the project. It is a month away as i won't go to the machine shop until I pick up the latest batch of oil filter conversions in a few weeks. i will do this on any Motronic throttle body.
81 Euro undergoing total nut and bolt restoration
pictures at: flickr.com/photos/bertsphotos
Bookmarks