Results 1 to 8 of 8

Thread: Christmas Came Early-Warm Up Regulator Ceramic Coil 21 Ohms---E21 Fit

  1. #1
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool Christmas Came Early-Warm Up Regulator Ceramic Coil 21 Ohms---E21 Fit

    I found this on ebay with these The Warm Up Regulator Heating Coil can be removed and replaced when it breaks saving big bucks, he is in the Australia and has K and KE-Jetronic rebuilts items and parts for them. He has 21R,32R and 47R Ceramic Heating Coils. I ordered 2 of these 21 Ohms, about $12 each including shipping. My good,tested, and adjusted spare WUR-Bosch xxxx071 reads 20.2 ohms. 32R and 47R heating coils fit other WUR's- Control Pressure Regulators as well.

    s-l500.jpgs-l501.jpgs-l502.jpg

    https://www.ebay.com/itm/Warm-up-Reg...53.m1438.l2649

    Adjusting the WUR and Hella Upgrade

    https://www.bimmerforums.com/forum/s...sistance/page3

    Your All Welcome, Merry Christmas in Advance

    Randy
    Last edited by 320iAman; 12-18-2017 at 11:51 AM.

  2. #2
    Join Date
    Jun 2012
    Location
    Savannah, GA
    Posts
    240
    My Cars
    83 320i 00 540i6 85 535i
    Thank you Randy!

  3. #3
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool

    I was notified by Colin they have shipped .

    Here is his web site

    http://www.k-jet.biz/

    Randy
    Last edited by 320iAman; 12-18-2017 at 11:06 PM.

  4. #4
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool

    WUR Ceramic Resistors came in.
    DSCI0174.JPGDSCI0175.JPGDSCI0176.JPG

    Randy
    Last edited by 320iAman; 12-27-2017 at 09:46 PM.

  5. #5
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool

    Put K-jet.biz (Colin)-Australia in Fuel Distributor rebuild in Faq's in case someone wants to buy rebuilt FD's and WUR's and not rebuild and install and be done as several like to do..


    Randy

  6. #6
    Join Date
    May 2016
    Location
    Berkeley, CA
    Posts
    33
    My Cars
    1982 E21
    Looks like I need to replace my WUR. How big a job is it. It looks challenging. Any tips would be welcome.

  7. #7
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool

    Replacement is not difficult, it does take a while to remove items out of the way and remove the wur, its lines and so forth.

    Randy

  8. #8
    Join Date
    Nov 2007
    Location
    Sacramento, California
    Posts
    4,704
    My Cars
    1980 BMW 320i E21 M10B18

    Cool

    Quote Originally Posted by dbaldwin View Post
    Looks like I need to replace my WUR. How big a job is it. It looks challenging. Any tips would be welcome.
    Theres 3 suppliers that rebuild WUR's

    http://www.k-jet.biz/

    http://www.fuelinjectioncorp.com/

    http://www.cisflowtech.com/

    Randy
    Last edited by 320iAman; 01-16-2018 at 02:46 PM.

Similar Threads

  1. Warm Up regulator
    By jjgbmw323 in forum 1975 - 1983 (E21)
    Replies: 23
    Last Post: 05-27-2015, 01:51 AM
  2. warm up regulator
    By charbel in forum 1975 - 1983 (E21)
    Replies: 15
    Last Post: 11-24-2007, 11:41 AM
  3. Rough Start, Early Warm Up Stall?
    By CGDoig in forum 1983 - 1991 (E30)
    Replies: 3
    Last Post: 07-31-2007, 04:02 PM
  4. Warm-up Regulator: Bosch Part No.
    By fullswing in forum 1975 - 1983 (E21)
    Replies: 1
    Last Post: 07-12-2006, 05:18 PM
  5. Christmas came early today
    By CABimmer in forum Texas
    Replies: 35
    Last Post: 12-27-2005, 09:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •